CONDITION:

 

Brand New in sealed bag !

Package content Set of 2 

• Main contact pin uses the barb hook into the insulation while assemble.

• Secondary contact pin fixed with main contact pin while assemble cables by crimp method.

• The body and the insulation will used the barb hook to assemble tighten, and fix middle piece shell with punch riveting.

• The front shell rivet on the body by spring and washer and it can spin independently.

• The end part and middle part of the shell locked by screwing, and fix with the cable and the sleeve stable by a screw.

Note:
The second contact pin (ID 1.3/0.9/0.5 MM 2 pcs each)
and screw (3/4MM 2 pcs each) which is for locking cable
all including in the pack

Assemble:
1.Peel cable
​​1.1.the cable OD < 7.5mm:
Step01 -  Place shell’s back part<301> in the cable, and removed the sleeve<311/312> depends on the actual cable OD size.
Step02 - Peel the shields about 6.0 mm.
Step03 - Move out the cable braid and dielectric(X-2)mm, X is the cable OD which include the braids.
Step04 - To comb the braids by radial direction, and spread it out with core in vertical direction. And the spread out Round diameter is about 12.0mm. Move out the aluminum foil and dielectric along the braids spread area.
Step05 - Make sure the cable core is exposed 3.0mm than braids spread area.
 
1.2.the cable OD >7.5mm but <10.5mm:
Step01 - Peel the shields about 20.0 mm
Step02 - Move out the cable braid and dielectric(X-2)mm, X is the cable OD which include the braids.
Step03 - Place shell’s back part<301> in the cable, and removed the sleeve<311/312> depends on the actual cable OD size.
Step04 - To comb the braids by radial direction, and spread it out with core in vertical direction. And the spread out Round diameter is about 12.0mm. Move out the aluminum foil and dielectric along the braids spread area.
Step05 - Make sure the cable core is exposed 3.0mm than braids spread area.

Material :

Contact Pin  : Tellurium Copper  
Body  : Brass Zinc alloy 
Spring  : Steel 
Washer  : Steel 
Shell  : Brass Zinc alloy 
Screw : Stainless Steel 

Finish  :
Contact Pin  : 10u" gold plating (no nickel base) 
Body  : 10u" gold plating (no nickel base) 
Spring  : Nickel plating 
Washer  : Nickel plating 
Shell  : Satin nickel plating + topcoat 
Screw  : Nature 

Electrical Characteristics  :
ABC-1451
Impedance  : 50 ohms
ABC-1471
Impedance  : 75 ohms

Frequency Range  : 1GHz
VSWR  : up to 1.2
Contact resistance  : < 0.1 mOhm

Dimension  :
Cable hole without sleeve   : 10.5mm
​Cable hole with sleeve  : 06.5/08.5mm
Biggest OD  : 14.5mm
Total Length  : 42.0mm

 

The corresponding of the cable size  :
Center conductor   <01.5mm
Insulation OD  >03.0mm
Woven shield OD  >07.5mm
Outer plastic sheath OD  <10.5mm

Packing  :
Vacuum Bag(2pcs/1Set) 

 

Recommend soldering temperature ：

Temperature Soldering Iron, please keep 350 degree within 20 second / 400 degree within 15 second / 450 degree within 10 second

​

Product production process comply with RoHS

                                  

Please feel free to enquire on any items of AECO that are not list on our store.

INTERNATIONAL SHIPPING & HANDLING CHARGE:

 

Worldwide Free Shipping!!

  

 

Shipping Method:

 

Send out within 1~2 days, when receiving the notice of payment from paypal, from Hong Kong by airmail with Tracking No.

 

USA, Canada, UK, Australia. postal shipping time:

10 - 20 workings days.

 

Other countries, postal shipping time:

3-6 weeks

 

It may be delayed due to the bad weather or the postal strike.
 
Items can only be shipped to your address registered with Paypal

 

 

 

PAYMENT METHOD:

 

• We accept Paypal payment only

  
  
• International Bank Money Transfer

  

Others:

• Winning bidder will be contact within 3 days after auction end.
• Payment due within 7 days after auction end. 
• Please check out my other auctions as I will combine to save on shipping costs.
• Thank you for looking and email  questions are always welcome!!
  
  

Return Terms :

Exchange :

 All items will be examined before shipping, we do offer exchange of same item in case of damage for unknown reason. Item must be returned within 14 days from end of auction date. Once the item has been received and examined, we will ship a new item to you at our cost. Buyer pays for shipping item to us.

Return items MUST have all ORIGINAL packaging and accessories. Shipping and handling charges are non-refundable at any case.

Check out my other items!