Generous Sideways Travel to fit most 2" x 72" belt grinders, compatible with OBM and many other brands.
Works with flat platen to grind Bevels or contact wheels to grind hollow bevels
Using Guide:
Step 1. All the knife maker has to do is to scribe center lines on the edge of the blade;
Step 2. Place the knife blank onto the table.
Step 3. While keeping the blade flat against the table move the blade up until it is in contact with the belt.
Step 4. Start grinding while carefully keeping an eye on the scribed center line being careful not to grind past the line.
Warm Prompts: A sharp coarse grit belt is recommended for rough grinding then a finer grit belt can be used to polish the bevels.
Large 10" x 11" Table
Tooling Arm Holes Spacing: Center to Center 1-13/16" (1.8125")
Comes with all necessary fasteners to fix the position