![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
PLA | PLA+ | PLA META | PETG | SILK | ABS | TPU | |
Print temperature | 200-230℃ | 210-235℃ | 180-200℃ | 220-250℃ | 200-230℃ | 240-270℃ | 205-230℃ |
Printing speed | 50-100MM/s | 50-100MM/s | 50-100MM/s | 50-100MM/s | 30-60MM/s | 50-100MM/s | 20-40MM/s |
Tensile force KGF | 11-16 | 9-12 | 9-12 | 8-12 | 6-8 | 6-11 | / |
elongation at break | 4% | 45% | 35% | 210% | 200% | 25% | 600% |
melting point | 165-180 | 170-190 | 155-170 | 180-190 | 165-180 | 170-180 | 175-180 |
Hot deformation
temperature ℃
|
55 | 57 | 54.3 | 66 | 55 | 75 | / |
Density g/cm ³ | 1.24 | 1.24 | 1.24 | 1.25 | 1.24 | 1.04 | 1.15 |
Water absorption% | 0.50% | 0.50% | 0.50% | 0.80% | 0.70% | 1.10% | 0.50% |
FAQ
Why can't the filaments stick to the hotbed easy?
1). Check the temperature setting before printing, PLA filament temperature about 190-230℃;
2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;
3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
Tips:
1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
2).Be sure to insert the free end of the PLA filament into the holes to avoid being tangled for next time use.
3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.
Payment
We accept PayPal only!!!
Delivery details
1.Goods will be delivered within 5 working days after the payment received
2.We ship the items according to your Paypal address except the special notes from buyers !
3.Be sure that your Paypal address is correct when you buy the items in ebay.
4.We do not take responsibility for item loss due to wrong address.
5.We are not responsible for any customs duty incurred at foreign customs.If you want to ship in other way, please contact us.
Returns
1. Buyers must contact us within 30 days upon receiving the item(s), buyers should be responsible for the shipping cost for sending item(s) back and the shipping cost for re-sending the new item(s).
2. Please keep our products in original condition (packaging) if you return the item(s). If your item arrives faulty, we will exchange it for a replacement.
3. If you prefer a refund, we will fully refund to you through Paypal when we get the item.
Contact
The best way to contact us is by eBay messages.
We always reply eBay messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all eBay messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.
We commit you 100% satisfaction guarantee.
Feedback
1. We will appreciate a positive feedback with all 5 star rating when you are satisfied.
2. Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.
3. Please email us before leaving any 1 or 2 ratings, negative feedback or open any dispute.
4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.