Fog Ligth Bulbs Features

Fog Light Bulbs Specification

Install Caution
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the fog light when adjusting the bulb.

How To Confirm whether can-bus is needed?
This item wasn't exist self-decoding/self-Canbus【anti-flashing/anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1, the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2, the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3，The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)

Feasible Solution:
1, install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2, install the resistor, you need professional installation.
3, using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.

Notes：
1. It will be generated large heat during working.Please fix the resistor outside of the headlight housing.
2. Please fix the decoder to other accessories outside the headlight assembly to avoid shaking!!!
3. This item may not solve all compatible issues,that is not the product fault, was caused by the difference of the vehicle systems.
4. If you find this item doesn't solve the problem, please contact us first,we will provide profectional suggestions.
5. Some vehicles(such as Dodge, Chrysler, Jeep, BMW, VW ,AUDI, BENZ, Volvo ...vehicles) may need a more powerful resistor to help solve the above problem.