ANYCUBIC Water Washable 3D Printer Resin, 405nm High Precision UV-Curing 3D Resin, Low Shrinkage Standard Photopolymer Resin for LCD DLP 3D Printing

Usage Notes:

Shake the resin well before use.

Unscrew the cap and add it to the resin tank according to requirements, and select the right settings when using.

After printing, use supporting tools for post-processing, including spatula, diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%), lactate or isopropyl alcohol cleaning liquid.

Precautions:

1.Keep sealed and away from light at room temperature. Avoid heat or sunlight.

2.Recommended temperature: 18-35℃. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60℃) before use.

3.In case of settlement of resin pigment, please stirring or shaking well before use.

4.In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled.Therefore, it is suggested that:

(1)The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);

(2)The duration of sun exposure (summer) should be controlled at about 1 hour;

(3)Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;

(4)It is recommended to print in a dark room, or cover when printing.


Multiple Choices, No Limitation ANYCUBIC Water Washable Resin supports 3 ways of washing: Anycubic Wash & Cure machine, Running Water Washing and Ultrasonic Washing. There's one way that suits you.	Low Shrinkage & Fast Speed Print with fast curing speed and low shrinkage rate provide the excellent printing experience and effects. And the molding shrinkage as low as 3.7%.	Higher Precision Based on ANYCUBIC photosensitive resin, specific proportions of nano - scale microcrystalline ceramic powders are added to make the resin more sensitive to light and get high accuracy prints.


Low Viscosity, Fast Printing ANYCUBIC 3D Water Wash Resin with low viscosity means it has great fluidity during the printing process and helps to improve printing speed.	High-quality Prints without Cracks Anycubic Product Lab shows that the models printed with our resin can be stored for 3 years in natural environment without cracks after curing.(Different models and environments may cause differences in experimental results)	Long Shelf Life ANYCUBIC upgraded water washable resin longer the shelf life to 1 and a half years, to help the resin to store longer and safe use.