This Monster Cooling relay wiring kit takes all of the guess work out of installing a single or a dual fan setup.
Perfect for the professional auto mechanic,the weekend machanic and for all DIY'ers.
It will make installing any Electric Fan(s) to your cooling system project that much easier.
Like starter kills, power door lock/actuator control, change a low current output to high current,
add ignition/accessory outputs,control motors/other electronics.
It is also suitable for automobile used for control, alarms, horn, headlight and more.
Pins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to
turn on the relay.
If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector,
carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it.
Also, you can use 6.3 mm female connectors
to connect directly to the relay pins. The relay should be good for 30 amps.
Anweisungen für das Relais-Kit:
Rotes Kabel direkt an Batterie anschließen.
Weißes Kabel zur Stromquelle des Zündschalters.
Schwarzes Kabel geht zum Thermostatschalter.
Blauer Draht geht zu den Lüftern.
Diese Einstellung lässt Lüfter laufen und saugt Luft durch den Kühler an.
1 Tag Bearbeitungszeit & Mindestens 1 Jahr Garantie & Schneller Versand
Fabrik Preis & Guter Kundendienst & Einfache Rückkehr
Your satisfaction is our primary goal.Positive feedback would be much apprecaited.If you are unsatisfied with our item or service, please contact us before leaving negative feedback. We are committed to resolve all issues in a friendly and satisfactory manner. Gererally, we reply ebay message within 1 business day. Due to time difference, we are in GMT+8, reply may not in a rapid manner,Pls be patient and undertand. |
This Monster Cooling relay wiring kit takes all of the guess work out of installing a single or a dual fan setup.
Perfect for the professional auto mechanic,the weekend machanic and for all DIY'ers.
It will make installing any Electric Fan(s) to your cooling system project that much easier.
Like starter kills, power door lock/actuator control, change a low current output to high current,
add ignition/accessory outputs,control motors/other electronics.
It is also suitable for automobile used for control, alarms, horn, headlight and more.
Pins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to
turn on the relay.
If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector,
carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it.
Also, you can use 6.3 mm female connectors
to connect directly to the relay pins. The relay should be good for 30 amps.
Anweisungen für das Relais-Kit:
Rotes Kabel direkt an Batterie anschließen.
Weißes Kabel zur Stromquelle des Zündschalters.
Schwarzes Kabel geht zum Thermostatschalter.
Blauer Draht geht zu den Lüftern.
Diese Einstellung lässt Lüfter laufen und saugt Luft durch den Kühler an.
1 Tag Bearbeitungszeit & Mindestens 1 Jahr Garantie & Schneller Versand
Fabrik Preis & Guter Kundendienst & Einfache Rückkehr