---

 Checkout:

After winning the auction, after 2 hours at the latest, you will automatically receive an email from us with a link to our purchase process. Please refrain from asking us for bank details! These will be communicated to you during the purchase process.

---

  If you have any questions, we are available by phone or email Monday to Friday from 8:00 a.m. to 8:00 p.m.

---

 Some non-binding processing instructions:

Our primer recommendation:

We offer epoxy filler primer in our eBay shop. This creates rust protection and a filler structure at the same time. As a rule, these primers or fillers are gray. But that doesn't always work. For example, for red finishes you should use a white filler so that the red tone has a higher brilliance. Likewise, light base coats or paints with a high pearl content often have low opacity. A pre-coat or epox filler in the following color is required. Likewise, almost every new car today is pre-treated with a colored filler on the assembly line, which is cheaper even for small dents because the lower layer is the same color as the upper paint layer. A filler in the vehicle color also reduces the amount of final coat required because it covers more quickly.

Our coverage recommendation:

If partial painting is required, we recommend purchasing our paint-adhesive paint protection cover, which is available in the eBay shop. This wafer-thin hood, which resembles a folding garage, is pulled over the vehicle and the section to be painted is cut out and taped off. This means the entire vehicle is quickly masked and protected from spray mist.

Painting plastics:

Plastics that have already been painted can easily be painted after roughening them. If the existing paint layer has been sanded off or the plastic is raw, an adhesive bridge must be sprayed. If the plastic is exposed to vibrations, the paint can crack. In this case, 20-30% plasticizer can be added to the last layer of paint. In our eBay shop we offer you high-quality products that guarantee you a good result if the work is carried out professionally.

Add-ons:

Refinishing is also known as “spot repair”. Prime and fill a small area of ​​the area to be painted. Adjacent clear coat areas are finely sanded. Apply the base coat in thin layers from the inside to the outside so that the paint mist does not settle on the surface. Only apply the base coat from the outside to the inside during the last spray coat. Now the clear coat is sprayed over the painted area. Then add 50% blending thinner to the clear coat and spray the transition area. Finally, spray pure blending thinner again over the entire area and the transition.

Plain varnishes in matt:

All plain varnishes (single-layer 2-component varnishes) are high-gloss. These are usually mixed 2:1 with hardener + 15% thinner. You can also get all of these 2K plain varnishes in MATT upon request. This new trend usually has to be mixed 4:1 with hardener + 50% thinner. The price usually remains the same.

---

 Excerpt from our eBay shop range:

Vehicle paints, vehicle preparation, VOC compliant car paints, vehicle polishes, 2K paints, metallic paint, pearl color paint, sanding discs, work protection, spray cans, Ralfarben, RAL, foil erasers, painting stands, plastic repairs, fiberglass mats, polyester universal filler, polyester repair resin, metallic polyester filler, eccentric sanding discs, 9-hole, 6-hole, sanding discs, sanding grid , filler, hardener, cleaning paper, masking paper, adhesive tape, fabric tape, thinner, clear varnish, effect varnish, flip-flop varnish, sanding block, mixing cup, sanding pads, abrasive fleece, matting gel, pre-cleaner, adhesive cleaner, rim cleaner, press sponge, carpet cleaner, polishing cloth, control powder, dust tack cloth, underbody care, UHS , brilliant clear varnish, clear varnish