paint material:
ATTENTION!
H226 Flammable liquid and vapour.
H315 Causes skin irritation.
Harder:
ATTENTION!
H226 Flammable liquid and vapour.
H317 can cause allergic skin reactions.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness and dizziness.
EUH066 Repeated exposure may cause skin dryness or cracking.
Dilution:
ATTENTION!
H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H336 May cause drowsiness and dizziness.
You are bidding on a 1 liter set
2K car paint
AutoUnion L31B Mars Red in shine
(2 components, one-coat paint)
Scope of delivery:
0.5 liter 2K car paint
AutoUnion L31B Mars Red in shine
(UNI no metallic)
(VOC compliant <420g/l)
0.25 liters hardener
0.25 liters of dilution
At this color will no clear coat needed unless you want it.
Ideally suited for painting or painting/rolling vehicles, motorcycles, trucks and much more...
This 2K car paint is very easy to work with, it dries quickly and its glossy surface has a high level of weather protection, as well as a high Durability and is scratch resistant.
With this 2K car paint you are up to date, with which one stands out in everyday life and becomes an eye-catcher.
as a gift for you
1 mixing cup with scale 1:1 - 5:1
1 paint sieve 190my
1 pair of gloves
Easy to process, low material consumption.
We guarantee absolutely new goods.
The surface should be grease and rust-free (sanded) to enable good adhesion.
processing
Sand the surface to be painted with a P500 random orbital sander or P1000 to 1200 wet sandpaper and then degrease well (silicone remover).
When working on new or unpainted plastic surfaces, apply a plastic primer and observe the drying time.
Then apply the filler or a primer (1.7 or 1.8mm nozzle size),
Processing temperature at least 20°C.
Sand the surface well with the appropriate grit of wet sandpaper. smooth.
Then clean with silicone remover, the surface must be free of dust (we recommend a tack cloth) and grease.
Before applying the paint, check the shade (make a spray sample).
Later complaints are not possible.
No claim for damages!
The 2K or base coats should be processed with a 1.3 or 1.4 mm nozzle size with 2-3 spray coats and even pressure.
The temperature should be at least 20°C.
The 2K colors are approx. Dust-dry after 20-30 minutes. After 2 days, the 2K paint is completely dry and fully cured after 4 days.
If you are not satisfied with the degree of gloss or want to protect the paintwork, you can apply a 2K clear coat if you wish.
In the case of basic colors (ready-to-spray metallic or UNI), after approx. 20-30 minutes flash-off time (color dulls) can be painted over with a 2K clear coat.
Everything for the preparation and follow-up for painting work and other great offers are of course also available in our shop.
For questions or information, we are at your disposal by phone or e-mail.
Contact:
Looking for something and can not find it? If you have any questions, we are available Monday to Friday from 8:00 a.m. to 8:00 p.m., get in touch!
Bonus!
With every paint order, our customers receive a 3-piece starter set for processing, consisting of:
Checkout:
After winning the auction after 2 hours at the latest, you will automatically receive an email from us with a link to our checkout process. Please refrain from asking us for bank details! These will be communicated to him in the course of the purchase process.
Some non-binding processing instructions:
Our primer recommendation:
We offer epoxy filler primer in our eBay shop. This creates rust protection and a filler structure at the same time. As a rule, these primers or fillers are grey. But that doesn't always work. For example, you should use a white filler for red top coats so that the red tone has a higher brilliance. Likewise, light-colored basecoats or paints with a high pearl content often have low opacity. A primer or the epoxy filler in the subsequent color is required there. Likewise, almost every new car today is already pre-treated on the assembly line with a colored filler, which is also cheaper for small impacts, since the lower layer is the same color as the upper layer of paint. A filler in the color of the car also reduces the amount of final paint required because it covers faster.
Our cover recommendation:
If partial painting is required, we recommend purchasing our paint-adhesive paint protection hood, which is available in the eBay shop. This wafer-thin hood, resembling a folding garage, is pulled over the vehicle and the section to be painted is cut out and masked. The entire vehicle is masked off quickly and protected from overspray.
Coating of plastics:
Plastics that have already been painted can easily be painted after roughening. If the existing paint layer has been sanded off or the plastic is raw, a bonding agent must be sprayed. If the plastic is exposed to vibrations, the paint can crack. In this case, 20-30% plasticizer can be added to the last coat of paint. In our eBay shop we offer you high-quality products that guarantee you a good result with professional execution of the work.
For paint finishes:
Blending in is also referred to as a "spot repair". Apply a small amount of primer and filler to the area to be painted. Adjoining clear coat areas are finely sanded as well. Apply the base coat in thin layers from the inside to the outside so that the paint mist does not settle on the surface. Only use the last coat of paint to apply the base coat from the outside to the inside. Now the clear coat is sprayed over the painted area. Then add 50% fade-out thinner to the clear coat and spray the transition area. Finally spray pure blending thinner again over the entire area and the transition.
Uni lacquers in matt:
All plain paints (single-layer 2-component paints) are high-gloss. These are usually mixed 2:1 with hardener +15% thinner. All of these 2K uni paints are also available in MATT on request. However, this new trend usually has to be mixed 4:1 with hardener + 50% thinner. The price usually stays the same.
7 liter set 2K car paint desired color night blue metallic no clear coat color!
Buy it now
5 liter set 2K car paint desired color night blue metallic no clear coat color!
Buy it now
3.5 liter set 2K car paint desired color night blue metallic no clear coat color!
Buy it now
1.75 liter set 2K car paint desired color night blue metallic no clear coat color!
Buy it now
7 liter set 2K car paint brilliant black metallic no clear Lackpoint new!
Buy it now
5 liter set 2K car paint brilliant black metallic no clear Lackpoint new!
Buy it now
3.5 liter set of 2K car paint brilliant black metallic no clear Lackpoint !
Buy it now
1.75 liter set of 2K car paint brilliant black metallic no clear Lackpoint !
Buy it now
1 liter set 2K car paint brilliant black metallic no clear Lackpoint new!
Buy it now
5 liter base coat ready to spray VW Audi LB2Y orange metallic car paint trend paint!
Buy it now
4 liters ready-to-spray water-based BMW A83 silver metallic car paint Lackpoint !
Buy it now
5 Liter Ready to Spray Base Coat Candy Yellow Metallic Car Paint Color new!
Buy it now