1 liter 1K synthetic resin goblin green metallic gloss car paint Lackpoint tuning

1 liter 1 component synthetic resin car paint Glossy in colour

Leprechaun Green Metallic


The synthetic resin paint is easy to work with, does not require a clear coat and is also suitable for rolling and brushing. 

For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation. 

The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints. 

With every paint order you will receive free of charge:

1 pair of painting gloves

1 mixing cup

1 paint strainer


No water-based paint!


VOC regulation

Please note the VOC regulation

From the 01. January 2007 the changes from the so-called "VOC regulation" (2004/42/EC or 1999/13/EC) take effect.

For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below.

These applications are:

-       Restoration of vintage cars

-       Filling of aerosol spray cans

-       Painting of vehicles of the Bundeswehr, civil defense, fire brigade, as well as the forces responsible for maintaining order

-       Painting of vehicles used in public service exclusively in urban areas

-       Industrial painting (e.g. plastic parts not related to vehicles).

With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden.

You also confirm that you will only use the products that you purchase from us that do not comply with the VOC limit values ​​for the exceptional cases mentioned above.

The responsibility for the intended sale is hereby transferred from Lackpoint Dresden as the seller to you as the buyer.

 

processing

Processing temperature at least 20°C.

Sand the surface to be painted with grit P500 to P800 and then degrease well (silicone remover).

When working on new or unpainted plastic surfaces, apply a plastic primer and observe the drying time.

Then apply the filler or a primer

We recommend a 1-component primer for synthetic resin paint

Sand the surface well with the appropriate grit (P500-P800) or smooth.

Then clean with silicone remover, the surface must be free of dust (we recommend a tack cloth) and grease.

Painting - 2 spray coats 

At 20°C, the paint is dry to the touch after about 2-3 hours and completely dry after 5-6 days.

 


For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation.  The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints.  For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products
For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation.  The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints.  For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products
For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation.  The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints.  For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products
For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation.  The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints.  For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products
For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation.  The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints.  For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products
For processing with the spray gun, the paint must be diluted with 15-25% thinner. The addition of thinner is also recommended for brush or roller application in order to improve the flow behavior and evaporation.  The paint adheres directly to steel and sheet steel (well degreased) and to Allen common paint primers. We recommend using 1-component primers for synthetic resin paints.  For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below. With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden. You also confirm that you will only use the products