1 liter ready-to-spray base coat suitable for BMW P5T Frozen Marina Bay Blue Met. car paint
1 liter of ready-to-spray diluted base coat in the color suitable for BMW
suitable for BMW P5T Frozen Marina Bay Blue Metallic
This base coat must be painted over with a 2K clear coat
The base coat is easy to apply, it dries quickly and has an elegant appearance in the end.
With every paint order you get:
1 pair of painting gloves
1 mixing cup
1 paint sieve
No water base coat!
VOC regulation
Please note the VOC regulations
From the 01. January 2007 the changes from the so-called "VOC regulation" (2004/42/EC or 1999/13/EC) take effect.
For us as a dealer, this means that we have to ensure that products that are not VOC-compliant, such as industrial paints, are only used for painting in the exceptional cases mentioned below.
These applications are:
- Restoration of classic cars
- Filling aerosol spray cans
- Painting of vehicles of the Bundeswehr, civil defense, fire brigade, as well as the forces responsible for maintaining order
- Painting of vehicles used in public service exclusively in urban areas
- Industrial painting (e.g. plastic parts not related to vehicles).
With the purchase you confirm that you are familiar with the legal situation of the ChemVOCFarbV and have been sufficiently informed about it by us - Lackpoint Dresden.
You also confirm that you will only use the products that you purchase from us that do not comply with the VOC limit values for the exceptional cases mentioned above.
The responsibility for the intended sale is hereby transferred from Lackpoint Dresden as the seller to you as the buyer.
processing
Processing temperature at least 20°C.
Sand the surface to be painted with grit P500 to P800 and then degrease well (silicone remover).
When working on new or unpainted plastic surfaces, apply a plastic primer and note the drying time.
Then apply the filler or a primer
We recommend an epoxy primer (e.g. item number 162527166545)
Sand the surface well with the appropriate grit (P500-P800). smooth.
Then clean with silicone remover; the surface must be free of dust (recommended dust cloth) and grease.
Apply the base coat in 2-3 spray coats, depending on the opacity of the paint. Between coats approx. Allow to flash for 5-10 minutes.
After 20-30 minutes flash-off time (max. 24 hours) the base coat must be painted over with a 2-component clear coat.