MUCAR C90 supports Engine Diagnosis ONLY
The CS90 diagnostic tool is an enhanced engine system scan, the fastest 60 seconds can be completed. Note: It's not a full system diagnostic tool, if this affects your use, please select MUCAR VO6.
Make a Better Detection for Car Engine System.
This section is specifically designed for the engine called the "car heart". It is necessary to keep an eye on the engine status to ensure the efficient operation of the engine to ensure your travel safety. In addition, it can also be used before you send the car to environmental detection.
Support 28 Reset Services(All Resets Lifetime Free for All Cars)
MUCAR CS90 currently supports 28 maintenance software, The maintenance software is completely free to use and free to upgrade.
1.Oil Lamp Reset Service
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.Immobilizer Reset
In order to prevent the car from being used by illegal keys, through the anti-theft key matching function, the car can only be used normally after the anti-theft device control system on the car recognizes and authorizes the remote control.
8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.
11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.
12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.
14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.
15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
16.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.
19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.
20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.
24.ODO Reset
a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.
b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODO reset after maintenance.
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
Free Full OBDII Functions
- I/M readiness: is used to identify what powertrain information is available to the scan tool.
- Displays Fr-eeze Frame Codes.
- Read the Fault Codes: lists the emission-related "confirmed" diagnostic trouble codes stored. It displays exact numeric, 4-digit codes identifying the faults.
- Clear the Fault codes: is used to clear emission-related diagnostic information. This includes clearing the stored pending/confirmed DTCs and Freeze Frame data.
- O2 Sensor Test: displays the oxygen sensor monitor screen and the test results gathered about the oxygen sensor.
- On-Board Monitoring Test: this is a Request for On-Board Monitoring Test Results for Continuously and Non-Continuously Monitored systems. There are typically a minimum value, a maximum value, and a current value for each non-continuous monitor.
- Live Data in graphs such as engine RPM, temperatures, ignition advance, speed, etc.
- EVAP Test:could enable the off-board test device to control the operation of an on-board system, test, or component.
- Request Vehicle Information:VIN,CALID,CVN(s).
- DTC Lookup: lists "permanent" diagnostic trouble codes stored,and view the code meaning online via Google.
One-Click WIFI Free Update Lifetime
1. Turn on the scanner 2. Connect to WIFI 3. Click the upgrade button on the home page to achieve one-click upgrade
Support 19 Languages （The system languages supported by this scanner have been increased from 13 languages to 19 languages! Please download the latest system version from the scanner!）
English, French, German, Italian, Spanish Portuguese, Japanese, Russian, Dutch, Hungarian, Slovak, Greek Arabic, Czech, Polish, Chinese Traditional, Korean, Turkish, Danish
Support 126+ Car Brands and 1000+ Vehicles
USA： For BXGM,For CHRYSLER, For AUSTFORD, For GM,USAFORD
EUROPE: For ASTONMARTIN,For AUDI,For BENZ,For BMW,For BXFIAT,For CITROEN,For FERRARI,For FIAT,GAZ,For LANDROVER,For MASE,RATI,For OPEL,For PAZ,PEUGEOT,For PORSCHE...
Austrillia: For AUSTFORD,For AUSTHOLDEN
Asia: For BAIC,For CHANGAN,CHANGCHENG,For CHANGHE,For DAEWOO,For DAIHATSU,For DFXK,FLYER,For FUTIAN,For HAFEL HMAZDA,For HONDA,For HUACHEN,For HYUNDAI,IKCO,For INDIANMARUTI,For INDIANTATA,ISUZU,For IVECO.IZH,For JACTY JIAO,For JINLONG,For JOYLONG,For JPISUZU,For KIA,For LIFAN,For LIUWEITY ,For LUXGEN,For MAHINDRA,For MALAYSIA PERODUA,For MALAYSIA PROTON,For MARUT,For MAXUS,For MAZDA,For MITSUBISHI...
Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
Product Parameters:
CPU:MT6580 CORTEX-A7 1.3GHz/4Core
Memory:2GB DDR3/16GB EMMC
Display:5 Inch/ 480*854 MIPI LCD Display Screen
TP:GT911 GFF
WIFI:802.11b/g/n 2.4GHz
USB:TYPE C*1
Battery:3.7V / 600mAH Lithium Polymer
Power Input:OBD 12V input or TYPE C 5V input
Packing List:
1*MUCAR CS90 Host
1*Manual
1*Charging cable
Warranty service：
There is 1 YEAR free warranty from the date of purchase. For any question or problem with this tool, please contact us for help directly and we will feed back to you within 24 hours.
We accept the following payment methods
To ensure that your items can be delivered as soon as possible, please fill in your payment information accurately！
Thank you
All the products in my shop have local warehouses in the United States, Britain, France, Germany, and Australia.
U.S. warehouses: They are located in two warehouses in New Jersey and California, both of which can be shipped within 1 day and delivered within 5 days.
Australian warehouse: located in Sydney, we use Australia Post or fastways express delivery, and the products can be delivered within 3-7 days.
UK warehouse, with self-built warehouse in Wolverhampton and stock in official ebayg warehouse, both can be delivered within 2 days .
German warehouse, we use eBay official warehouse, there is sufficient inventory, and can be sent to 28 EU countries. It can be shipped the same day the order is placed, and delivered within two days within Germany.
We accept the following return methods
Returns are accepted within 30 days of buyer receiving the item. (Does not include man-made damage or misuse).
100% Money Back Guarantee!
All products will be 100% tested before shipping. Buyer has up to 30 days from date of receipt for replacement if item is defective due to postage handling. All shipping costs for returned products are paid by the seller, please contact us for the return address
For any questions about defects, returns, item exchange requests, please contact us and send us a message before opening any kind of case or request. We are committed to making every customer 100% satisfied and solving any problems. We highly value and appreciate your business. Thanks.
Returns are accepted within 30 days of delivery.
Returned items must be in new, unaltered and resalable condition.
Seller is not responsible for any labor costs, dealer store fees, or damage caused by incorrect installation.
THINKCAR has an intelligent production workshop, which covers an area of more than 3,500 square meters, is equipped with a fully automatic packaging production line, and has intelligent warehouse management.
THINKCAR products have gone through more than 50 production processes, passed 2 meters, 3 meters and other height drop tests, -4℉-140℉ high and low temperature tests, 8 hours vibration test, 1000 plug-in tests, 1000 circular wire throwing tests, Continuous working test for more than 48 hours, real vehicle test of more than 100 car brands, including most popular models in Europe, America and Asia.
As the official store of Thinkcar, all products are 100% original products. THINKCAR is a company specializing in automotive diagnostic tools, committed to providing quality products and services.
（1） We maintain high standards of excellence 5 Star feedback and strive for 100% Customer satisfaction. Please do not hesitate to leave us your positive feedback if you are satisfaction with our products ,delivery or services .
（2）If you have any questions about our products or services, Please Contact usimmediately before you leave Neutral or Negative feedback,So that we can satisfactorily address your concerns. We will reply you within 12 hours, except on Weekends and Holidays.
（3）If you have any needs for products, please contact us ,we’ll do our best solve with you .
4Solve any problems with you in friendly way after communication. Refund or Replacement will be provided as you like.
