Medium tack transfer tape. Just the right amount of sticky, but still releases the vinyl when applied. A grid on the backing paper allows you to cut the exact size for your design. High quality, clear, and will even transfer on small letters. Our products are designed for all craft cutters including Provo Craft Cricut, Silhouette Portrait, Pazzles, Craft ROBO, QuicKutz, etc. for any design or sign graphics.
|
💦Great Savings
💦 Red Alignment Grid
💦 Easy to Use & Transfer
|
💦 The main steps: | |||||
1.After your vinyl graphic has been weeded, lay it onto the transfer tape starting from one side and working towards the other. Use a squeegee or credit card to firmly press down the design. | 2.Flip over your design, the grid on the release liner should be facing up. Separate the release liner from the transfer tape and vinyl by peeling the release liner back. Ensure the vinyl sticks to the transfer tape. If you see the vinyl is not sticking, lower the release liner and apply more pressure. | 3.Now that you have the vinyl with the sticky side up on the transfer tape, carefully place the design where desired, use a squeegee or credit card to firmly press down the design. | 4.Remove the transfer tape. Try to pull with your hand close to the object at a tight angle. If you see the vinyl is not sticking, lower the decal and apply more pressure. |
1. Questions, pls. Contact us via ebay message or email us. We will reply to your message within 24-48 hours.
2.Working time: Monday-Friday
Please note that we are not available on weekends. If you contact us at the weekend, we will be there for you again soon on Monday.
3. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 stars" in the very area