About the item:
- 【Attention】 Manual adapter without electrical contacts in the adapter ring and cannot achieve auto diaphragm or auto-focus, please be careful.
- 【Function】 This adapter helps to connect Leica M mount lens to Fuji X mount cameras. Infinity focus function is allowed, please adjust manually when first use.
- 【Cameras】 Designed to compatible with Fujifilm Fuji X-Series Mount Cameras: Fuji X-Pro1, X-Pro2, X-T1, X-T2, X-T10, X-T20, X-E1, X-E2, X-E2S, X-A1, X-A2, X-A3, X-A10, X-M1 etc.
- 【Material】 Upgrade all-metal and matting varnish design to avoid light reflection, high quality adapters with anodized aluminum construction.
- 【Verify Your Lens and Camera Mount】 You can find your lens/camera mount in the len's/ camera's original user manual. Or find your lens/camera on the manufacturers' website and under the product specifications look for "mount type". Any question about products please contact us freely for suggestions.
- K&F Concept Updated Leica M to FX Adapter, Manual Lens Mount Adapter with Matting Varnish Design, Compatible with Leica M Mount Lens and Compatible with Fujifilm Fuji X-Series X Mount Cameras
Product Description
Features:
Attention:
Features:
- Allows focus infinity
- Elegant clear appearance
- Compact and high quality metal material
- High Precise to ensure the perfect fit
- Diaphragm control of the lens is set manually
Attention:
- Manual adapter without autofocus or aperture ring.
- Skillful installation, don't too much force.
- Adapting an APS-frame lens to a full-frame camera may generate vignetting, some cameras could correct it by adjusting APSC.
- Adapting a full-frame lens to an APS-frame camera provides excellent edge-to-edge sharpness. The smaller image field helps minimize the effects of lens distortion and aberration by using the 'sweet spot' or center of the larger lens image circle. And it will magnify the focal length by 1.6 on Canon, 1.5 on Nikon and Sony, 2.0 on M4/3 camera
- The position of the infinity mark [∞] of the telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes. The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity.
- If your camera indicates "lens is not properly installed", please modify the camera settings: 'Menu' -> 'Setup' -> 'Release w/o Lens' -> 'Enable' (Exact naming and location may change depending on camera model). If your lens does not have a manual aperture control ring, it will be maximum aperture by default.If you want to adjust the aperture but without manual control ring, then you need to remove the adapter ring and adjust the aperture on the camera.
- Set camera "release shutter without lens" to enable when using the adapter for the first time, or the camera will fail to recognize the lens and the shutter may not be released.