DESIGN
The energy staff is a prefabricated structure of several parts:
• the central part is a block for generating high-voltage
sinusoidal voltage (with a frequency of about 300 kHz and an amplitude of up to 500-700V) with an external
electrical connector on a short cable;
• two twisted field emitters on cylindrical plastic pipes-frames,which are symmetrically located on both sides of the central part;•
the basis for installation of a staff vertically;
• top cover.
Attention! The device is delivered to the customer in a cardboard box disassembled into its component parts for self-assembly on site.
is delivered to the customer in a cardboard box disassembled into its component parts for self-assembly on site.
OPTIONS:
1. Passive Energy Staff
To operate such a staff, an external signal generator with AFC (automatic frequency control) is required, designed to work with bifilar
Tesla coils. Using a LIVE SINUS generator in a low voltage version
connections, you get full connector compatibility and extensive customization options for convenience and efficiency (such as
as a complex dynamic AM + FM signal modulation along the Fibonacci series and
etc.).
Passive Energy Staff in its central part contains a built-in step-up capacitive torus, wound with a twisted pair of MGTF wire, from which high voltage is removed for emitters.
This version of the staff is designed for indoor use.
(without the influence of precipitation and other adverse factors
external environment).
2. Active Energy Staff
It is an Energy Staff that does not require connection to work.
to an external generator. In addition to the step-up capacitive torus, a compact generator with a voltage converter is built into the Energy Staff. For work
this version of the Energy Staff, it should be connected to any DC source in a wide voltage range (6.5–33V, at a current of up to 0.2A). Can
use both a power supply for connecting to a 220V network and a battery.
This version of the staff is designed to work both indoors and outdoors. The design of the Energy Staff, with proper use of the latter, protects
built-in electronics from moisture. The built-in generator board is equipped with an efficient heat sink, which guarantees reliable operation.
products around the clock, even at elevated ambient temperatures.
Tesla coils. Using a LIVE SINUS generator in a low voltage version connections, you get full connector compatibility and extensive customization options for convenience and efficiency (such as
as a complex dynamic AM + FM signal modulation along the Fibonacci series and etc.).
Passive Energy Staff in its central part contains a built-in step-up capacitive torus, wound with a twisted pair of MGTF wire, from which high voltage is removed for emitters.
This version of the staff is designed for indoor use.
(without the influence of precipitation and other adverse factors external environment).
2. Active Energy Staff
It is an Energy Staff that does not require connection to work.
to an external generator. In addition to the step-up capacitive torus, a compact generator with a voltage converter is built into the Energy Staff. For work this version of the Energy Staff, it should be connected to any DC source in a wide voltage range (6.5–33V, at a current of up to 0.2A). Can
use both a power supply for connecting to a 220V network and a battery.
This version of the staff is designed to work both indoors and outdoors. The design of the Energy Staff, with proper use of the latter, protects built-in electronics from moisture. The built-in generator board is equipped with an efficient heat sink, which guarantees reliable operation.products around the clock, even at elevated ambient temperatures.
This version of the staff is designed for indoor use.
(without the influence of precipitation and other adverse factors external environment).
2. Active Energy Staff
It is an Energy Staff that does not require connection to work.
to an external generator. In addition to the step-up capacitive torus, a compact generator with a voltage converter is built into the
Energy Staff. For work this version of the Energy Staff, it should be connected to any DC source in a wide voltage range (6.5–33V, at a current of up to 0.2A). Can
use both a power supply for connecting to a 220V network and a battery.
This version of the staff is designed to work both indoors and outdoors. The design of the Energy Staff, with proper use of the latter, protects built-in electronics from moisture. The built-in generator board is equipped with an efficient heat sink, which guarantees reliable operation.products around the clock, even at elevated ambient temperatures.
ASSEMBLY, CHECK
1.Connect the connector of the upper emitter of the Energy Staff to the corresponding connector of the central unit and mechanically connect these parts. Connect and attach the bottom emitter in the same way.
2.Insert the four legs of the stand into the cross. Then put the staff on the stand
and put on the cover.
3. In the passive version of the Energy Staff (with connection to an external generator): connect the Energy Staff to the generator (for the LIVE SINUS generator this is
unmarked cable, i.e. low voltage mode).
Active Energy Staff (with built-in generator):
connect the Energy Staff to the power source through the appropriate connector.
4. You can check the presence of a field around the emitters with the green indicator of the electric field. The field should be checked both around the lower emitter and the upper one.
4. You can check the presence of a field around the emitters with the green indicator of the electric field. The field should be checked both around the lower emitter and the upper one.