A: The graphics card power supply uses three FP solid capacitors to make the graphics card power supply more stable and safe.
B: The adapter card has a parallel port or a large 4PIN interface to enhance the power supply, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
C: The graphics card slot uses the original imported connector to make the graphics card contact better.
D: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation.
E: The cable is relatively soft and easy to route. If you want to put the graphics card, put it there.
F: The PCI-E connector plug is fully gold-plated, which is more wear-resistant and increases electrical conductivity.
G: The slot has a fixed buckle, which is convenient for disassembling and fixing the graphics card, so that the graphics card will not fall off from the slot.
H: Equipped with real USB3.0 cable, the cable is thick pure copper core, high efficiency, low impedance!
Product parameters:
Model: 006 4P
Name: PCI-E to PCIE adapter extension cable
Product performance: extension cord graphics card 4P interface to enhance power supply
Interface: PCI-E 1X
Product length: 60cm
Product color: blue
Product weight: 0.067kg
Product material: Taiwan gold + PceA
System support: Ll nx / xp / win7, 8, 10
Packing: electrostatic bag
Accessories:
ICE adapter card
4Pin power supply
USB extension cable
PCI-E x1 slot version
Precautions:
1. This extension cable is suitable for motherboard PCI-E slot (1X 2X 4X 8X 16X). Please plug in the floppy drive power cord when using it. When plugging or unplugging the PCI-E extension cable, the computer must be disconnected and then plugged in. Be sure to read the precautions when using!
2. The matching wire is customized, so don't just find a wire and plug it in. Remember!
3. Be sure to recognize the direction when plugging in. Don't plug it in reverse or off-position to prevent the device from being burned. When plugging in, hold the socket of the device before plugging in to avoid inserting the socket pins with excessive force.
4. The big 4pin is a standard power supply. When plugging in the power supply, please check whether it is plugged in properly. Be careful when plugging and unplugging the cable.
5. It is recommended to use the old flat cable for dual-core graphics cards, and it is also recommended to use the old flat cable for motherboards with 16X.