eBay

Micro AC 220V 50Hz 6W Synchronous Motor Gearmotor Gear Box Motor Fixed Speed Permanent Magnet Motor 50KTYZ

CW, CCW High Torque 1/2.5/5/10/15/30/66/90RPM

High-quality materials, environmentally friendly, safe and reliable, durable and long life. Excellent craftsmanship, quick installation and simple use.

This product is a geared synchronous motor that can be controlled in clockwise and counter-clockwise rotation, by combining a permanent magnet synchronous motor and a reduction mechanism. It is characterized by low power consumption, high torque, low noise, small size, light weight and easy to use.

70KTYZ, 60KTYZ, 50KTYZ Model Motor can be Clockwise and Counter-Clockwise rotation, two yellow wires combined into one for the common terminal connected to any end of the 220V power supply, red and green (blue) connected to the capacitor, change the power supply of the other wire connected to the red or green wire can change the direction of motor rotation.

Main applications: monitor heads, electric instruments, HVAC valves, automation instruments, electric models, electric advertising, mahjong tables, screen machines, overmoulding machines, money counters, barbecue equipment, electric ticketing devices and all small power low constant speed running equipment

Notice: The lower speed, the larger torque !

- Motor Model: 50KTYZ

- Voltage: AC 220V

- AC Phase: Single Phase

- Power: 6W

- Frequency: 50Hz

- Insulation Class: E (Max 120°C)

- Fixed speed, Not adjustable speed

- Reversible, CW and CCW rotational can be controlled

- Protection type: Open

- Mounting type: Vertical
- Motor Size: 51x38mm

- Straight Output Shaft
- Output Shaft Diameter: Ø 7mm

- Available in following No-load Speed:

1 RPM (Maximum torque: 28 Kgf.cm)
2.5 RPM (Maximum torque: 23 Kgf.cm)
5 RPM (Maximum torque: 15 Kgf.cm)
10 RPM (Maximum torque: 8 Kgf.cm)
15 RPM (Maximum torque: 5 Kgf.cm)
30 RPM (Maximum torque: 2.8 Kgf.cm)
66 RPM (Maximum torque: 1.5 Kgf.cm)
90 RPM (Maximum torque: 1.1 Kgf.cm)

- Exact dimensions can also be viewed in the photo gallery.

- Tips:

Make sure the voltage of the motor is correct before use, and if it is a DC motor, also make sure the power supply current is sufficient.
Do not overload the use, overload the reason is mainly divided into two parts, torque and shaft force, the load torque can not exceed the rated torque of the motor, the shaft force can not exceed the axial and radial axis of the shaft allowable force, after adding the load motor measured current can not exceed the rated current, general motor use must be equipped with a fuse to avoid overload burn motor.
Do not store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce the effect of the motor.
When assembling transmission parts such as gears and pulleys on the motor shaft, do not knock abnormally when pressing in.
When soldering the positive and negative terminals of the motor, the temperature of the soldering iron should be 340℃±40℃ and the heating time should be within 3 seconds.
When installing the motor, pay attention to whether the screws are too long, and stop the over-long screws from pressing against the parts inside the motor.
Torque concept: for example, drive the pulley, 10KG.CM of torque, the pulley radius 1CM belt is 10KG pull Belt pulley radius 5CM, the belt is only 2KG pull.
Commonly used units: 1N.M=10KG.CM=0.1KG.M ；1HP=750W ；1W=1V.A

● You can find more products in different material, type, color , sizes and shapes in our shop！ If you have special needs, please contact us, we can customize according to your needs!

● Note:

- Please allow minor errors due to manual measurement. Thank you for your comprehension.

- Monitors are not calibrated, the element color shown in the photos may differ slightly from the real object. Please take the real one as standard.

Package included : （According to your choice）

On 09/10/2022 at 11:05:19 AEDT, seller added the following information: