8mm 10mm edge banding punching pliers flat diagonal bevel
woodworking pliers punching pliers for edge banding, bank card, PVC, hard film,
veneer
Features:
* The pliers are
made of zinc alloy, and the punch is heated and reinforced with high carbon
steel.
* Pliers can
make holes for edge banding, film, PS board, blister and paper. The paper can
be printed up to 25 sheets of 70g paper.
* Available hole
diameters are 8mm/0.315".
* This powerful
punching pliers has a long paper depth, up to 25MM, which saves effort for
punching.
* It can punch
holes for PVC hard film below 1.6MM, such as bank cards or VIP cards.
* It can punch
holes for leather materials above .3MM and below 3MM thickness, such as belts.
* Note: Do not
punch holes in rigid PVC films with a thickness of more than 2.0MM.
The
film must not be perforated.
Specification:
Name:
Edge Banding Punching Pliers
Material:
Zinc Alloy + High Carbon Steel
Available
material: edge banding/bank card/PVC/hard film/veneer
Aperture
diameter that can be punched: 8mm/0.315"
Size:
130*90mm/5.12"*3.54",
Packing
included:
1
* Edge Banding Punching Pliers
Note:
1.
Due to manual measurements and slight color variations, please allow 1-3 cm
(0.4-1.18 inches) difference to suit different display settings.
2.
Due to the light and screen difference, the item's color may be slightly
different from the pictures. Please understand.