AEM Electronics Water/Methanol Standard Controller Kit - Internal MAP, 35PSI Max

    The AEM Electronics Water/Methanol Controller Kit joins the range of water/methanol parts and accessories. Allowing replacement of an existing controller or upgrade of your Water/Methanol system dependent on the intake Air Pressure/Air Flow sensing, horsepower/boost and fuel type of your specific application.

    • Robust construction for long life service
    • Air pressure or airflow sensing controller options are available
    • Suitable for Forced induction or naturally aspirated applications.
    • Includes wiring harness with positive-lock connector and colour coded wires for easy installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid
    • Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs
    • The wiring harness is terminated with a positive-lock connector on one end with colour-coded wires to ease installation, an integrated pump ground circuit and additional wire for optional on/off fluid solenoid
    • "Boost Safe" failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)

    AEM's Water/Methanol injection systems are developed for a range of applications in both petrol and diesel high-performance forced induction and naturally aspirated engines. They achieve measurable improvements in reducing air inlet charge temperatures, by as much as 100 degrees in some applications, increase your vehicle's anti-knock index, allowing reliable boost pressure increases and advanced ignition timing, without using high octane racing fuels, and due to the "steam-cleaning" effect of burning a water/methanol mix, reduce the carbon deposit build-up in your engine and potentially improve fuel economy.

    AEM's Water/Methanol Controllers are offered in two formats, either as a boost dependent controller, with a built-in Mass Air Pressure (MAP) sensor, for measuring PSI from an atmospheric base pressure up to a given Maximum PSIg or as a Multi-input Controller with inputs for external MAP/MAF (Mass Air Flow) Sensors, giving greater flexibility for custom/ultra high-boost applications above the maximum PSI range of the boost dependent controller options.

    All controller options feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, covered status LED and test buttons for added splash resistance, a rear integrated positive-lock socket/connector system for securing the controller's redesigned wiring harness and an easy to access integrated fuse and moulded mounting tabs.

    AEM's Water/Methanol controllers include an integrated "Boost Safe" output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing warning light to more advanced strategies like pulling boost or ignition or switching fuel maps on a standalone engine management system. When combined with the integral and highly accurate conductive low-fluid switch found in AEM tanks, "Boost Safe" can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems.

    The Boost Dependent controller is a progressive type controller. This means that
    fluid will be injected in proportion to the amount of boost that is detected by the internal Mass Air Pressure (MAP) sensor. In other words, more boost equals more fluid. The controller housing has a moulded-in barbed nipple to accept a boost hose and a wiring legend on the back. The Standard Boost Dependent controller is designed for forced induction petrol vehicles up to 35 PSI of boost and the HD boost dependent controller for HD & diesel engines 5-40 PSI boost range.

    The Multi-Input controller is also a progressive type controller. This means that
    fluid will be injected in proportion to the reference signal detected by the available voltage or frequency inputs. The controller housing has a dip switch selector bank that allows reference inputs from a 0-5V voltage-based external MAP, frequency-based Injector Duty Cycle (IDC), frequency-based MAF or a 0-5V voltage-based MAF. This controller is suitable for high compression naturally aspirated (NA) and forced induction turbo/supercharger applications for both petrol (above 35 PSI boost) and diesel (above 40 PSI boost) engines.

    Available controller kit options:

    Standard - Boost Dependent with internal MAP up to 35 PSI for forced induction petrol

    HD - Boost Dependent with internal MAP up to 40 PSI for forced induction diesel

    Multi-Input - External 0-5v MAP/MAF or frequency IDC/MAF for NA & forced induction petrol and diesel above 35 PSI

    Kit Includes: Controller and colour coded wiring harness

    Please note: Run-time between tank fills is dependent on the specific installation/application and will vary dependent on Water/Methanol supply tank size, engine HP and swirl-generator/flow requirements.

    13.04.2024, 07:00:06

    Demon Tweeks was established in 1971 to service the needs of the motorsport competitor and our principals of offering top products, quality, service and rapid availability are as important to us today as they were in the very beginning. We are leaders in the supply of race wear, competition and road tuning parts for cars and bikes. Within a staff totalling over 140 is a dedicated sales team servicing upwards of 3000 telephone and online enquiries received every day from the UK and the rest of the world.

    Our impressive 140,000 sq.ft. Superstore and warehousing facility in Wrexham, North Wales allows us to carry around £7 million worth of stock at all times, over 256,000 items – more than any competitor. Our rapid despatch and no quibble money back guarantee are here to give you the customer real confidence when ordering – you can count on us!

    UK DELIVERIES
    All items for sale in our eBay store are held in stock, most being offered with FREE UK MAINLAND DELIVERY (Northern Ireland, Scottish Highlands & Islands, Isle Of Man, Isle Of Scilly, Jersey and Guernsey are not eligible for free delivery unless the item can be sent in the post). If you choose the free delivery, the item will be sent via the most cost effective means possible, i.e. Parcelforce courier or 2nd class post (you can see which in the “Postage, returns and payments” tab). Please note: We are advised by Royal Mail that items sent 2nd class post can take up to a maximum of 14 working days to be delivered.

    OVERSEAS DELIVERIES
    Using eBay’s Global Shipping Program we ship to over 100 countries worldwide — and counting! When you view the item, you’ll see the item price plus estimated shipping and import charges. Once you purchase the item, the final charges appear at checkout. That means no additional charges or surprises when your item arrives. If your parcel is lost or damaged along the way, the GSP protections and policies will cover you.

    CAN I CHANGE MY ADDRESS ONCE I'VE PLACED MY ORDER?
    Please note, we run an automated system on eBay and the address details that come through to our system from eBay are the details you input at the checkout page and this is the address that we have to ship the order to.

    I'VE ADDED A NOTE TO MY ORDER, CAN YOU VIEW IT?
    Not always. As above, because of the automated system we operate and the sheer volume of orders we get, we CANNOT guarantee that we will see any eBay notes that you add to your purchase. If it is something vital to your order, please contact us via the eBay messaging system before purchasing.

    RETURNS
    Goods deemed unsuitable or not required may be returned via eBay for a refund if they are returned to us within a 30 day period from date of original order, subject to the following and depending on reason.

    • The cost of postage and packaging to return the item to us is paid by you, the customer.
    • Items are to be returned unused and returned in their original condition & packaging.

    IMPORTANT
    All returns for items purchased via our eBay store need to be done via your purchase history within eBay by selecting the item/s you wish to return. Click on the item and then more options, request a return choosing the correct reason and we will respond and issue you a returns authorisation number and details to do so.

    We cannot accept responsibility for returned parcels which are undelivered or damaged in transit back to us. Please retain your proof of postage etc.. as you may require it in the event of a claim with your carrier.

    The easiest way to contact us is via the eBay message system.

    Business Hours:
    Monday - Friday: 8.30am - 5.00pm
    Saturday & Sunday: CLOSED
    BANK HOLIDAYS: CLOSED

    * PLEASE NOTE: Messages sent outside the working hours will be answered as quickly as possible during the next working day. Also, during periods of high demand, there may be additional delays in us responding.