Peters Spares Model Railways Ltd
Product Details

ESU 97417.S0824 LS V5 GWR Group 2 DCC Sound Decoder 8 Pin (U Drive)



ESU 97417.S0824 Steam GWR Group 2 DCC Sound Decoder 8 Pin (U Drive)


Tank Locos - 42/52xx 2-8-0T, 72xx 2-8-2T, 44xx/45xx/4575 Small Prairies


With Sugar Cube Speaker 15 x 11 x 3.5 mm 8 Ohm With Integrated Various Height Sound Chamber Kit. (The Chamber MUST Be Used OR The Sound Won't Function Correctly.)


(PLEASE NOTE SOUND DECODERS ARE THE RECORDINGS OF THE MENTIONED LOCO (S), YOU MAY NEED TO CHANGE THE SPEAKER TO FIT THE LOCO YOU ARE INSTALLING IT IN, SO PLEASE CHECK FOR AVAILABLE SPACE OR ENQUIRE BEFORE BUYING.)


F0 Brake Whistle (Slot 4)

F1 Sound On/Off (Slot 1)

F2 Whistle, Playable (Slot 7)

F3 Injector (Slot 14)

F4 Blower (Slot 21)

F5 Drive Hold

F6 Safety Valve (Slot 12)

F7 Injectors (Slot 20)

F8 Dynamic Brake

F9 Flange (Slot 15)

F10 Drive Mode (Light ot Heavy) enable Shunt Whistles F2

F11 Guards Whistle (Slot 10)

F12 Shovelling Coal / Aux 1 (Fire Box LED) (Slot 17)

F13 Coupling Clank (Slot 8)

F14 Handbrake (Slot 18)

F15 Auto Uncoupling Cycle

F16 Master Volume Control. Toggle On/Off to change or leave for mute

F17 Water Fill (Slot 25)

F18 Shunt Mode

F19 Lights On/Off

F20 AWS Bell (Slot 22)

F21 Firebox Door (Slot 6)

F22 Aux 2

F23 Toot (Slot 19)

F24 Two Tone Toot (Slot 11)

F25 Acceleration CV 3 & 3 On/Off


Auto Sounds, Steam Hiss (Slot 24), Intelli-brake (Slot 27) Blower (Slot 21)

Randon Sounds when stopped, Safety Valve, Injectors, Coal Shovelling


NOTE: F15 WORKS GREAT WITH KD COUPLINGS, TURNING ON WILL REVERSE THE LOCO, UNCOUPLE AND MOVE AWAY ALL AT THE PRESS OF A KEY.DIRECTION DEPENDENT.


The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any 00 or 0 gauge locomotive.


LokSound 5 decoders are available with all popular interface types and are supplied with a sugar cube speaker (11 mm x 15 mm) and a sound enclosure.


The new LokSound decoder will convince you once more with its inner values.


Operating Modes

Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola®, Selectrix® and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus® the decoders register themselves fully automatically on suitable command stations.


This decoder supports all DCC programming modes and thanks to RailCom® you may read out the CV values on the main, provided you have a command station supporting RailCom®. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.


Motorola® users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola® addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021.


The M4 protocol supports the automatic registration on mfx® compatible central units.


The LokSound 5 decoder supports the Märklin® braking sections just as well as the ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix® braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.


The LokSound 5 decoder is also suitable for analogue DC and AC (!) layouts.


Sound

The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 – 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.


The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.


Functions

We are quite aware that you want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it. Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements – known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO® and Krois® as well as Telex® couplers.


Motor Control

Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique “Auto Tune” function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types.

How it started; I have been interested in model trains since I was a child. My dad gave me the train bug. But on a little pocket money I couldn't afford many second hand models so I found damaged & none working ones to fix up. It was more fun and much cheaper, now I can fix most locos so they run like new.

Progress: When I realised I had too many spares I set up an eBay shop and repair business with digital DCC decoder fitting services in Middlesbrough.

Where I am now: Peters Spares now sells new and used models from the leading manufacturers past & present: Hornby, Bachmann, DJ Models, Gaugemaster, Peco, Metcalfe, Triang, Tri-ang, Dapol, Heljan, Wills, Esu, Ixion, Wrenn and many more as well as continuing the repairs and DCC fitting service. We are also recommended by Hornby on a daily basis for selling Hornby spares. Used model railways & collections always wanted. Drop us a line or just pop in for a visit to Peters Spares Model Railways ltd where our staff who are all railway modellers are always happy to help.

If you have any suggestions or comments please email us via eBay.

Please take some time to have a look around our eBay shop with something for everyone. Add us to your favourite sellers or sign up to my shop newsletter.

Thanks From Peters Spares Model Railways Ltd

Postage prices are displayed above the items' description in the postage tab. It has a selection of choices relating to your country of origin & a quantity option.

The postage price paid includes the postage of different size parcels with appropriate VAT, packing materials (like boxes, packing bubbles, bubble wrap, stickers, tape & royal mail post collection) not just the postage.

We offer a flat rate postage charge for UK and overseas (unless stated in the listing) one amount of postage for one or more items so you can buy more than one item for the same postage price. Any order over £100.00 in goods will need to be sent via a courier to be tracked and insured. eBay won't do this automatically so please request an invoice.

This is automatically calculated by eBay at the checkout page. If you feel that the postage is incorrect do not pay. Instead, please request or await an invoice. (Courier 24 hour shipping with insurance and tracking (depending on location see below) can be purchased instead or 1st Class please select this at the time of paying or ask us to amend the invoice.) If you are purchasing from overseas please request an invoice before paying for combined orders.

Europe Shipping Orders under 2kg £18.20

Rest of World Orders under 2kg £39.99

Standard UK mainland courier £8.99

Scottish Lowlands: (24 hour)

DG, TD, EB39, EH, G, FK1-18, KA1-26, KY, ML, PA1-14, PH1, PH2-14, PH2-14, AB33-36 (2-3 Day service) Up to 20 kilos normal cost of £8.99

Scottish Highlands (24 -48 Hour)

IV2, AB41-45,51-56, FK19-21, IV1-20, 25, 30-37, 54, 63 KW1-3, 6-10, 14, PH15-26, 33, 49, 50

AB37-38, IV21-24, 26-28, 40, 54, KW5, 11-13, PA21-40, PH30-32, 34-41 (48 HOUR) Up to 20 kilos £28.99

Scottish Offshore: (48-120 Hour)

HS1-9, IV41-53, 55-56, KA27-28, KW15-17, PA20, 41-49, 60-78, PH42-44, ZE1-3 (48-120 Hours subject to ferry schedules and weather) Up to 20 kilos £28.99

Northern Ireland

BT1-17 & BT18+ (48 Hour) Up to 20 kilos £28.99

Dublin (48 Hour) UPS Up to 20 kilos £28.99

Eire, Southern Ireland or none postcode areas (48 Hour) Up to 20 kilos £23.99

Isle of Wight:

PO30 - PO41 Up to 20 kilos normal cost of £12.99

Jersey, Guernsey, Alderney, Herm & Sark & Isle of Man: (48 Hour) Up to 5 kilos £28.99

Overseas insurance and tracking can be added if requested if not already included in the listing.

As mentioned above we will combine your postage but only before you pay. We do not refund postage to buyers ordering one item, then paying, then ordering another, then paying and so on, then asking us for them to be combined, as they will be shipped as separate orders. This is due to the number of parcels we ship per day we can't hunt out other items already wrapped to combine with others. We are trying to save both parties time and money by combining postage before payment only.

Collection is also available free from our store during opening the hours of 10am - 5pm Monday to Saturday (Closed Sundays & Bank Holidays)

If you disagree with our postal charges we would prefer you to buy elsewhere.

We accept Paypal in pounds sterling, please call us to pay by Credit & Debit cards over the value of £5.00 including postage (If on the checkout page you choose the pay with the eBay credit card option you must call us! to pay by with your credit / debit card as no payment has been taken unless you do so).

We wish to receive payment within 10 days of purchase if you are unable to do so please do not purchase the item(s) until you are able to.

Due to a lot of eBayer's not paying for items after five days we will open a buyer payment dispute this will give 7 days for payment or a response from the buyer to resolve the lack of payment. After 7 days if no payment has been made we will close the case to recoup our seller fees and leave an unpaid strike on the buyers account & then block this customer from buying form us in the future.

We are sorry about this, but there are a lot of time-wasters out there who spoil it for the other honest eBayer's.

Postal days are Monday to Friday, the mail is collected by royal mail at 4.00pm, any orders received after 1.30pm may be sent the same day dependent on time allowing us to do so or they will be sent on the following postal day excluding Saturday, Sunday & Bank Holidays. Please note delays are possible around the bank holidays.

Please be aware we mark item(s) as shipped when we process the orders and you will receive an eBay automated email.

We always get a proof of posting for each item shipped, this covers £20.00 of the item(s) value. If you require postal insurance please enquire before buying or paying for the item(s).

For items that are not faulty:-

Our returns policy is as per, The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 that come into force in the UK on 13th June 2014.

These Regulations apply in relation to contracts entered into on or after that date.

Regulations superseded, the following do not apply in relation to contracts entered into on or after 13th June 2014: the Consumer Protection (Distance Selling) Regulations 2000, the Cancellation of Contracts made in a Consumer's Home or Place of Work etc. Regulations 2008.

The consumer (you) may cancel the sale at any time in the cancellation period without giving any reason, and without incurring any liability except under these provisions�
(a) where enhanced delivery chosen by consumer;
(b) where value of goods diminished by consumer handling;
(c) where goods are returned by consumer.

Normal cancellation period.

The cancellation period ends as follows for sales contracts; the cancellation period ends at the end of 14 days after the day on which the goods come into the physical possession of, (a) the consumer, or (b) a person, other than the carrier, identified by the consumer to take possession of them.

Exercise of the right to withdraw or cancel.

To withdraw an offer to enter into a distance or off-premises contract, the consumer must inform the trader of the decision to withdraw it. By either phone call or Email.

To cancel a contract of sales (under regulation 29(1) Of, The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations), the consumer must inform the trader of the decision to cancel it. Either by phone call or Email.

Where the consumer informs the trader by sending a communication (Phone call or Email), the consumer is to be treated as having cancelled the contract in the cancellation period if the communication is sent before the end of the period.

Peters Spares must make the reimbursement using the same means of payment as the consumer used for the initial transaction, unless the consumer has expressly agreed otherwise.

If the value of the goods is diminished by any amount as a result of handling of the goods by the consumer beyond what is necessary to establish the nature, characteristics and functioning of the goods, the trader may recover that amount from the consumer, up to the contract price.

For the purposes of the above paragraph handling is beyond what is necessary to establish the nature, characteristics and functioning of the goods if, in particular, it goes beyond the sort of handling that might reasonably be allowed in a shop.

It is not Peters Spares responsibility to collect the goods, the consumer must:
(a) send them back, or (b) hand them over to the trader or to a person authorised by the trader to receive them.

The consumer must bear the direct cost of returning goods

The address to which goods must be sent is, Peters Spares Model Railways Ltd, Unit 2J Brighouse Business Village, Riverside Park, Middlesbrough, TS2 1RT, without undue delay and in any event not later than 14 days after the day on which the consumer informs the trader of the cancellation.

Once your goods have arrived back to the trader, we will refund you by your original payment method unless agreed by the consumer.

Return of faulty goods:-

Peters Spares Model Railways Ltd, fully complies with, The Consumer Rights Act 2015.

The Consumer Rights Act 2015 became law on 01 October 2015, replacing three major pieces of consumer legislation - the Sale of Goods Act, Unfair Terms in Consumer Contracts Regulations and the Supply of Goods and Services Act.

The following are statutory rights, under a goods contract.

Goods to be of satisfactory quality.

Goods to be fit for particular purpose.

Goods to be as described.

Other pre-contract information included in contract.

Goods to match a sample.

Goods to match a model seen or examined.

Trader to have right to supply the goods etc.

What remedies are there? If statutory rights under a goods contract are not met.

Consumer's rights to enforce terms about goods.

Right to reject.

Partial rejection of goods.

Time limit for short-term right to reject.

Right to repair or replacement

Right to price reduction or final right to reject

)