Top Reason our ASD60 is the best choice for your car

1. ASD60 can support full system diagnosis of single vehicle type for VW, SEAT, SKODA, BMW and Benz car models.
2. ASD60 can support 19 kinds of special functions like Oil/Service/Maintenance Light, ABS bleeding... and etc.
3. ASD60 can support program the hidden function and action test.
4. ASD60 can support full OBD2 functions.
5. ASD60 software get free update with life time no any extra cost again ,we will add more functions in the app.
6. ASD60 device has 3 years warranty and lifetime tech support.
7. ASD60 can support multi language, just choose the language in the setting is ok.

ASD60 can support full system diagnosis for single vehicle type

1.To diagnose Engine System if your engine get any error code and any problems with

2.To diagnose Airbag System if you Feel the Airbag will not pop up automatically, and with the error codes onside the ez400pro can read the error codes and help you fix it

3.To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

4.To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

5.To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

6.To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

7.To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

8.To diagnose Light System if you see rapid signal blinking or dimming lights.

And many more ...

19 kinds of Special Functions

*Oil/Service/Maintenance Light
Performs reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate, and turns off the warning light

*SAS
Performs calibration for the Steering Angle Sensor (SAS), which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. On successful completion of the calibration, the steering angle sensor fault memory is automatically cleared

*EPB
Maintains the electronic braking system safely and effectively through deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

*DPF
carry out numerous functions to the Diesel Particulate Filter system. The tool will manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit

*Headlight
It detects the light of the environment, then decides whether to automatically turn on the headlights or not. It can also adjust the headlights in time

*BMS reset
Re-match the control module and motoring sensor for battery detecting more accurately, clear original low battery information and prevent the related control module from detecting false information

*Tyre Pressure Reset
Relearn TPMS sensors so that new sensors can be recognized by ECU

*ABS bleeding, Airbag Repair, Crankshaft Resync, Injector Coding， Gearbox Match, and more ……..

*Activate Test

The process of sending and retrieving information from a vehicle control module with a device is known as Actuation test or bi-directional control. The main aim of the actuation test function is to request the control module to perform a specific function including system tests, actuator tests, functional tests, inspection tests, reprogramming or reinitialization, thus saving diagnostic time.

Eg: You connect a fuel pressure gauge, cycled the key and cranked the engine but you couldn’t figure out anything regarding the fuel pressure. With the actuation test function of this diagnostic tool, you can send a fuel pump command on instruction and see the proper fuel pressure, figuring out if there is a problem with the fuel pump circuit or pump.

* Read Auto VIN
You can choose the Auto VIN function to scan all systems of all detected vehicles or tap control unit to access a specific system for diagnosis.


Manual VIN Input
For vehicles not supporting Auto VIN function, you can manually input the VIN code of the tested car for further diagnosis

ASD60 has full OBD2 functions

*Read Live Data
retrieves and displays live data and parameters from the test vehicle’s ECU.Display live data in text, graph & analog for easy data review.

*Read Freeze Frame
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

*O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

*On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.

*Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

*Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.