The decals are supplied on a premium polymeric calendered sign vinyl with a 7 year durability. 

----------------------------

1 - Clean the area thoroughly with soap and water, then use isopropyl alcohol to ensure the area is degreased.  Do not use glass cleaner.

2- Using a Trigger spray bottle, squirt the water over the screen and surrounding areas where the strip is to be fitted. 

3- Peel the sticker from the release liner and spray the adhesive side with with water again. 

4 - Position onto the glass and ensure the strip is fitted with a 1-2 mm even border on the top and side edges. A spare pair of hands will help here.

5 - Apply the sticker using a vinyl squeegee, be sure to work evenly to push out all of the water. It is best to squeegee from the middle outwards. 

6- Allow the adhesive to begin to cure, this will take around 30 minutes depending on your climate temperature. You can now spray the application tape on-top of the sticker and slowly remove the tape. 

7 - check for any lifted edges or bubbles. Then should be pressed down and or popped.