This set consists of 1x Magcode 12V PowerClip wired into a CTEK comfort connect socket,1x 12V Magcode Power Port Socket, 1x Power Port Cover and 1x 12V power lead

This will allow you to connect your Magcode Powerclip plug to all CTEK charges fitted with comfort connect connection system (this does not fit older CTEK models with white, plastic connectors) 


The comfort connect plug can show you charge status of the battery by using a colour coded LED contained within the comfort connect:

Red: means the battery charge is below 12.4 V. It’s definitely time to charge the battery.

Yellow: means the battery charge is between 12.4 and 12.65 V. It’s time to start thinking about charging the battery.

Green: means the battery charge is more than 12.65 V. OK! No need for charging.


MagCode Power System is a revolutionary magnetic connector system for 12 V and 24 V DC applications


The Power Port (socket) and Power Clip (plug) both contain magnets and within the port is a movable plate that when “attracted” by the clip allows current to pass.

This system is uniquely keyed so there cannot be a miss mating between 12 and 24V which also makes the system short circuit proof. Once the clip is removed the port is de-energised so even if the contacts are shorted out by a metal object nothing will happen.


Thus the MagCode PowerSystem is 100% short-circuit-proof.


Applications

The MagCode Power Systems already used in several OEM's are ideal for passenger cars, trucks, motorcycles, campers and boats where cigarette lighter receptacles are presently in use for exterior connectors on vehicles, under conditions of sustained charging and high current load.


Power Port - 6.3mm flat connectors 

Power Clip - Screw terminals 

Mounting Opening - 28mm diameter (M28)

Max. current load 15 A

The supplied power lead is 1.5M total length and is made with 1.5mm² cable (rated at 21A). One end of the cable is fitted with 6.3mm fully insulated Female Spade Terminals for connection to the Magcode Powerport Socket. The other end is terminated with M6 (1/4") brass rings for connection to your battery. This cable is supplied fitted with a 20mm 5A fuse, however this could be exchanged for a fuse of up to 10A (alternative fuses not supplied)

The comfort connect assembly is approximately 500mm total length, with approximately 400mm of cable. It is supplied fitted with a 15A inline fuse. 


For further electrical solutions please visit our Ebay store by clicking here