Manual Drain Unblocker, Toilet Plunger and Sink Drain, High Pressure Powerful Clears and Unblocks for Bathrooms, Kitchens, Sinks, Baths and Showers…


  • THE HIGH PRESSURE DRAIN CLEANER / BLASTER Includes 4 adaptors for every size of plug hole-large, small, toilet adaptors.
  • FASTER AND MORE EFFECTIVE than regular plungers, Removes the toughest of blockages with up to 50 psi of pressure.
  • AIR-POWERED PLUNGER, safe for any drain, works on sinks, bath tubs and toilets.
  • ENVIRONMENTALLY FRIENDLY, environmentally safe as it uses no chemicals to clear the clog.
  • REUSABLE AND EASY TO STORAGE, with standshlf.

How to use it：

1.Install the appropriate plug according to the size of the pipe diameter,

2.Pump up the hand pump about 10-20 times, until could not pump into the air to get high pressure gas,

3.Block pipe outlet, have it sealed; Pull the trigger to release the high pressure gas.(you could have it repeated till dredge the pipeline.)

Package List:

1 x Drain Blaster

4 x adaptors

If you found that the product pressure does not increase, please following the instructions to operate:

1. Please check that the sealing ring and gas storage cap (as shown in the picture) are installed correctly. There is a small cover used to block and store air pressure, without this cover, it does not build up pressure when pumping all the air from the handle.

2. The sealing rubber ring is affected by uncertain weather, and may be affected by thermal expansion and contraction when the ambient temperature is relatively low, resulting in a certain preheating expansion time, you must press the handle more times.

3. The upper and lower sections are not completely tight. Press it again and try again.

4. The valve core is loosened and must be pressed firmly to tighten.

5. The screws that loosened during transport will affect the pressure reserve and make a noise. Please tighten the screws.

Safety Warning

DO NOT use this device if you are not sure that your pipe system is strong enough to rssist the cleaning pressure. The manufacturer will NOT be responsible for any damage due to unsupported traps, faulty pipes or improper use!