Carbon Brushes 0.51x0.31x2.81 Inch for Electric Motors Power Tool, 20 PackUSD 7.8
Carbon Brushes for Electric Motors Power Tool Table Saw, 10 PackUSD 7.34
Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool, 2 PackUSD 6.42
Carbon Brushes 0.87x0.63x5.2 Inch for Electric Motors Power Tool, 4 PackUSD 7.57
Carbon Brushes 0.79x0.31x0.2 Inch for Electric Motors Power Tool, 4 Pack
What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
What will I get?
Package Content: 4pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x8x5mm/ 0.79x0.31x0.2 inch
Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
What should I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
What will I get?
Package Content: 4pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x8x5mm/ 0.79x0.31x0.2 inch
Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
What should I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
Hot Item
- Carbon Brushes 0.51x0.31x2.81 Inch for Electric Motors Power Tool, 20 PackUSD 7.8
- Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool, 2 PackUSD 6.42
- Carbon Brushes for Electric Motors Power Tool Table Saw, 10 PackUSD 7.34
- Carbon Brushes 0.87x0.63x5.2 Inch for Electric Motors Power Tool, 4 PackUSD 7.57
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Carbon Brushes 0.79x0.31x0.2 Inch for Electric Motors Power Tool, 4 Pack
What is this?
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
What will I get?
Package Content: 4pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x8x5mm/ 0.79x0.31x0.2 inch
Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
What should I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
What will I get?
Package Content: 4pcs Motor Carbon Brushes; Total Length: 42mm/1.65 inch; Carbon Brush Size(LxWxH): 20x8x5mm/ 0.79x0.31x0.2 inch
Are there any advantages of the product?
The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
How to use it?
The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
What should I notice?
Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
- Carbon Brushes 0.51x0.31x2.81 Inch for Electric Motors Power Tool, 20 PackUSD 7.8
- Carbon Brushes for Electric Motors Power Tool Table Saw, 10 PackUSD 7.34
- Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool, 2 PackUSD 6.42
- Carbon Brushes 0.87x0.63x5.2 Inch for Electric Motors Power Tool, 4 PackUSD 7.57
Hot Item
- Carbon Brushes 0.51x0.31x2.81 Inch for Electric Motors Power Tool, 20 PackUSD 7.8
- Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool, 2 PackUSD 6.42
- Carbon Brushes for Electric Motors Power Tool Table Saw, 10 PackUSD 7.34
- Carbon Brushes 0.87x0.63x5.2 Inch for Electric Motors Power Tool, 4 PackUSD 7.57
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.