Pair H11/H8/H9 60W High Power LED Headlight High Low Beam Kit
Adopted opening high speed cooling fan design, less noise and better heat dissipation.
Double protection circuit inside design, overheat protection and EMI, ensure longer lifespan and avoid interference problem.
Zinc Alloy Material Reflector and 2 sides emitting ensure for the better beam pattern and brightness.
Light efficiency increased by 25% comparing with ordinary chip, better temperature resistance, lumens up to 16000LM, lifespan Over 30,000 hours.
Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front, improve brightness and distance.
Item Specifics Operating Temperature:-40~80 degree Color Temperatureļ¼6000K Pure White Lifetime:Over 30000Hours Working Voltage:DC 12V (Fit:9-12V Vehicles) Lumens: 16000LM/Kit;8000LM/Bulb Wattage: 60W/Pair; 30W/Bulb
Package include: 2 x H11/H8/H9 LED Headlight Bulb
Install Caution:
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system).
Q&A 1). Both side flicker/interference/error light? Pls kindly noted that your car need a resistor Cancelers Decoders, you can contact our customer service for help 2). My bulb type is H7, but the one you sent could not fit? Pls kindly noted that your car need a bulb holder to lock the bulb,you can contact our customer service for help 3). The bottom of the bulb is too big and it could not fit? For some special cars, you need to make a hole on the waterproof/dust cover and let the fans come out, and in this way will solve the radiating problem. 4).My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip? Pls kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car's metal shell. 5).the bulbs is loss and it could not fit(H8/H9/H11/9005)? Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise, only by this way can install the bulbs, if you just put it in the socket, cannot stable the bulbs.
Note: -- Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time. -- This model don't come with CANBUS Error Free function, Please contact us if you need CANBUS model.