- Wheel Spacers 16249 -
Specification
- Brand: Richeer
- Quantity: Four (4)
- Thickness: 1.25" (31.75mm)
- Bolt Pattern: 6x5.5" (6x139.7mm)
- Hub/Center Bore: 106mm
- Stud/Nut Thread Pitch: M12x1.5
- Studs: 12.9 Grade, stronger than 10.9 Grade
- Material: 6061-T6 Aerospace Grade Aluminum
- Brand: Richeer
- Quantity: Four (4)
- Thickness: 1.25" (31.75mm)
- Bolt Pattern: 6x5.5" (6x139.7mm)
- Hub/Center Bore: 106mm
- Stud/Nut Thread Pitch: M12x1.5
- Studs: 12.9 Grade, stronger than 10.9 Grade
- Material: 6061-T6 Aerospace Grade Aluminum
Compatible with
- 1995-2015 Tacoma (1st Gen, 2nd Gen) 4WD/Pre-Runner/VVT-i (not fit 2WD S-Runner or X-Runner)
- 2016-2021 Tacoma (3rd Gen)
- 2000-2006 Tundra
- 1989-2021 4Runner (3rd Gen, 4th Gen, 5th Gen)
- 2007-2020 FJ Cruiser
- 2004-2019 Ventury
- 2005-2021 Fortuner
- 1982-1997 Land Cruiser
- 1990-2021 Land Cruiser Prado
- 2001-2007 Sequoia
- 1989-2009 HILUX SURF
- 1979-2020 HILUX 4WD
- 2015-2020 HILUX REVO
- 2002-2009 GX470
- 2010-2021 GX460
- 1995-2015 Tacoma (1st Gen, 2nd Gen) 4WD/Pre-Runner/VVT-i (not fit 2WD S-Runner or X-Runner)
- 2016-2021 Tacoma (3rd Gen)
- 2000-2006 Tundra
- 1989-2021 4Runner (3rd Gen, 4th Gen, 5th Gen)
- 2007-2020 FJ Cruiser
- 2004-2019 Ventury
- 2005-2021 Fortuner
- 1982-1997 Land Cruiser
- 1990-2021 Land Cruiser Prado
- 2001-2007 Sequoia
- 1989-2009 HILUX SURF
- 1979-2020 HILUX 4WD
- 2015-2020 HILUX REVO
- 2002-2009 GX470
- 2010-2021 GX460
|
|
|
|---|
How to measure the fender gap to choose suitable thickness?
- Use the measuring device to measure from the outer of the tire to the inner fender lip,take the minimum gap after repeated measurements.
- To avoid touching and causing friction, the thickness of spacers should be less than the fender gap,(The maximum thickness of spacer = the minimum fender gap - 12mm ) is recommended.
- Use the measuring device to measure from the outer of the tire to the inner fender lip,take the minimum gap after repeated measurements.
- To avoid touching and causing friction, the thickness of spacers should be less than the fender gap,(The maximum thickness of spacer = the minimum fender gap - 12mm ) is recommended.
Installation Advice:
- Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
- Highly recommended use torque wrench while installing wheel spacers.
- Don't using an impact wrench because improper usage may cause the lug nuts and bolts to loosen or break while driving causing a potential injury .
- Please check all lug nuts and re-torque them after driving 20-60 miles,then re-torque again after driving 2000-3000 miles.
- Highly recommended professional installation.
- AFTER-SALES: If there are any problems during the purchase of the product, Please let us know,our professional team will deal with and help you to solve the problem ASAP!
- Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
- Highly recommended use torque wrench while installing wheel spacers.
- Don't using an impact wrench because improper usage may cause the lug nuts and bolts to loosen or break while driving causing a potential injury .
- Please check all lug nuts and re-torque them after driving 20-60 miles,then re-torque again after driving 2000-3000 miles.
- Highly recommended professional installation.
- AFTER-SALES: If there are any problems during the purchase of the product, Please let us know,our professional team will deal with and help you to solve the problem ASAP!