The size of the Flanged Tank Connector is determined by the internal Diameter (ID) of the joining socket.

Flange Tank Connectors are quick and easy to use, making them perfect for any job, great for inlet/outlet ports between chambers.

The Flange Tank Connector has been designed like a socket/joining bush, allowing for the ridged pipe/fittings to be solvent welded in either side of the connector. This is perfect if you wanted to join onto the inside/outside of a tank/filter system. (please view our pipe identification chart for finding your correct pipe size)

The Flange Tank Connector socket is solvent weld; always use a non-toxic sealant when fitting this product. 

Apply Sealant to the Flange body and the ridged sealing ring to offer a superb watertight seal when being assembled.

Supplied – flange tank connector body, rigid sealing ring, and stainless steel screws (quantity will vary depending on the size of the flanged tank connect)

Sizes Available...

25mm Flanged Tank Connector 

32mm Flanged Tank Connector

40mm Flanged Tank Connector

43mm Flanged Tank Connector (1.5" Waste) (40mm Domestic)

48.3mm Flanged Tank Connector (1.5" Grey Pressure)

50mm Flanged Tank Connector

56mm Flanged Tank Connector (2" Waste) (50mm Domestic)

60.3mm Flanged Tank Connector (2" Grey Pressure)

63mm Flanged Tank Connector 

75mm Flanged Tank Connector

82mm Flanged Tank Connector (3" Waste)

88.9mm Flanged Tank Connector (3" Grey Pressure)

90mm Flanged Tank Connector

110mm Flanged Tank Connector (4" Waste)

Radial 110mm Flanged Tank Connector (4" Waste)

114.3mm Flanged Tank Connector (4" Grey Pressure)

 Please view the Flanged Tank Connector chart for more information on the dimensions

Tank/Liner Thickness

The flange tank connector is supplied with self-tapping stainless steel screw, the self-tapping screw can be used with a tank/liner thickness of up to 5mm. however if the Tank/Liner you want to join the flange tank connector to, is thicker. We have the solution.

The Flange Extension Kit consists of 6 stainless steel bolts, locking nuts, and 12 stainless steel washers. The different kits will enable the flange tank connector to be used with tanks/liners from 0-20mm in thickness.

The Flange Extension Kits come in 4 sizes (lengths)

25mm Kit – for application with thicknesses of 0mm-5mm

30mm Kit – for application with thicknesses of 5mm-10mm

35mm Kit – for application with thicknesses of 10mm-15mm

40mm Kit – for application with thicknesses of 15mm-20mm

The flange extension kits are simple and easy to use; simply assemble the flanged tank connector in the same way. But replacing the self-tapping screws with the bolts and washers and tightening down from the back of the flanged tank connects with the locking nuts supplied.

Please Note: 1 x Flange Extension Kit will convert 1 x  Flanged Tank Connector 

Supplied – 12 x Stainless steel Washers, 6 x Stainless Steel Bolts, 6 x stainless steel Locking Nuts.