Standard series electric boilers are equipment used for heating premises up to 150 sq.m or as an additional in an existing heating system. This series’ models are highly reliable, available in capacities from 3 to 15 kW. The boilers have three heating stages, and may be connected to a 220V or 380V network. Standard boilers are equipped with a two-stage protection system from overheating, a flow sensor that cuts off power in case of no coolant circulation, and a safety valve that relieves pressure in the system above the maximum allowable 3 atm. Electric boilers of this line have a reliable three-speed circulation pump, an automatic air vent, an analog thermometer, indicator lights for operating modes and a capillary thermostat allowing you to smoothly regulate the temperature in the range of 0-90 °C. Due to competent engineering solutions based on many years experience, Standard series electric boilers are the most affordable in comparison with analogues of foreign and domestic manufacturers. The presented line of Tenko TM electric boilers facilitate installation and operation of heating systems as much as possible, being deservedly popular among a wide range of consumers.

The boiler body is made of high quality steel of domestic production, having anti-corrosion treatment. To give it additional protective properties and an elegant look, powder painting technology is used. The heat exchanger is made of high-quality thick-walled steel pipe from a leading domestic enterprise in the industry. To increase the service life, each heat exchanger undergoes a special anti-corrosion treatment and hydraulic testing at a pressure of 8 bar. The hydraulic group, assembled with reliable brass couplings and fittings, was tested together with the heat exchanger for tightness at a pressure of 3 atmospheres. Electric boilers of Tenko TM are supplied in brand cardboard packaging. The package box also includes an installation and operating manual.