eBay

Smart TV Box Android Quad Core HDMI 1080P Wifi Streaming Media Player UK

Description:
This test can be a USB charging current, voltage, discharge capacity, intelligent devices.
It can be very easy to find digital device charging problem.
Tester three dimensional size 60 X 28.5 X 15mm (without cable), about 15cm length of the line.
The only button on the tester is used to view and test data switch, the tester can store 10 groups of test data

Specifications:
1. Input Voltage: 3V - 7V
2.Input current: <3.4A
3. Parameters that you can test: Voltage of battery. Current of battery, value of discharging capacitor.
(Total ten parameters)
4. Communication function: Yes
5. Parameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,
one constant current source. Voltage of constant current source should be set to 8.5V
There are 3A, 2A, 1A and 0.3A models for current adjusting.
Here is a example for 3A:
When you set electronic load at 3A model, the current will be adjusted step by step.
It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen.
When you see the 3A result shown in LCD screen, the adjustment process is finished. You can shut
off the electronic load and the parameters will be saved automatically.

6. Clean the data : Push the button until the parameters changed to next sets of parameters. Then release the button.
Then the next sets of parameters will be started and they will start from zero.

7. Check the parameters : Quick beat the button double times(within 0.5s), then it is checking model.
The LED background will be flash.Then you can see the next set of parameters in LCD screen. Quick beat the
button double times again, you release the parameters checking model. LED background be be light with flash.

8. Over voltage or under voltage : An arrowhead will be shown in LCD screen and LED background will flash.
Push the button and LED will be light without flash.
It will last 30s.

9. Turn on mode l: The LCD screen will show all parameters within 1s when you connect power supply
by Micro USB or male plug of USB with wire.(It is to check whether the LCD screen is good or not).
Then you can see the parameters used last time(capacitor and which set of parameters). You also can
see the current voltage, current and over voltage or under voltage. Please see following illustration.

USB output port can be connected to a data line, a discharge resistor or the like cable devic
comprising a data communication function, the data does not affect the data transmission line.

Test specifications, voltage can not exceed 7V, current can not exceed 3.5A.
Note:When the voltage is lower than 4.7V on the instrument display or higher than 5.3V,
the LCD screen will flash, it does not affect the use.

Application examples
Because mobile phones and digital devices at low battery or full charge, the current and voltage is not a stable value,
the application example of the discharge
device is a USB 1A or 2A discharge resistor.

Payment

Payment

We accept PayPal only.

Payment must be received within 3~5 business day Days from the date of purchase.

Please leave note in PayPal when making the payment if you have any special request (colors/size).

Orders will be processed instantly and dispatched in 1 business day normally, so we do NOT accept any Email/ Message note before or after you place orders.

Shipping

Shipping

We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product and would like to return.

All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.

We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

Buyer is responsible for return shipping cost.

Returns

Ruturns

We offer WORLDWIDE SHIPPING. (Except China, Italy, and Croatia)

Orders will be processed and dispatched within 24-48 hours after payment is clear.

We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

If you have not received your shipment within 30 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!

Please note that estimated delivery time is depended on destination countries, and may subject to customs clearance process, and weather condition in your area.

Feedback

Feedback

If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem

Please DON'T leave negative or neutral feedback if you haven't received item in 7 days, because we have mentioned the shipping time repeatedly

contact us

How to contact us ?

1��Sent a email by ebay to tell us what you need(like a refound,do not receive your item ect.)

2��Add this facebook ID,if you want to know more about items information,other wise just sent email to us in ebay.thank you.

DESCRIPTION

PAYMENT

SHIPPING

RETURN POLICY

CONTACT US

Description:

Description:
This test can be a USB charging current, voltage, discharge capacity, intelligent devices.
It can be very easy to find digital device charging problem.
Tester three dimensional size 60 X 28.5 X 15mm (without cable), about 15cm length of the line.
The only button on the tester is used to view and test data switch, the tester can store 10 groups of test data

Specifications:
1. Input Voltage: 3V - 7V
2.Input current: <3.4A
3. Parameters that you can test: Voltage of battery. Current of battery, value of discharging capacitor.
(Total ten parameters)
4. Communication function: Yes
5. Parameters adjusting function :Yes. Equipment for parameters adjustment: One electronic load,
one constant current source. Voltage of constant current source should be set to 8.5V
There are 3A, 2A, 1A and 0.3A models for current adjusting.
Here is a example for 3A:
When you set electronic load at 3A model, the current will be adjusted step by step.
It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen.
When you see the 3A result shown in LCD screen, the adjustment process is finished. You can shut
off the electronic load and the parameters will be saved automatically.

6. Clean the data : Push the button until the parameters changed to next sets of parameters. Then release the button.
Then the next sets of parameters will be started and they will start from zero.

7. Check the parameters : Quick beat the button double times(within 0.5s), then it is checking model.
The LED background will be flash.Then you can see the next set of parameters in LCD screen. Quick beat the
button double times again, you release the parameters checking model. LED background be be light with flash.

8. Over voltage or under voltage : An arrowhead will be shown in LCD screen and LED background will flash.
Push the button and LED will be light without flash.
It will last 30s.

9. Turn on mode l: The LCD screen will show all parameters within 1s when you connect power supply
by Micro USB or male plug of USB with wire.(It is to check whether the LCD screen is good or not).
Then you can see the parameters used last time(capacitor and which set of parameters). You also can
see the current voltage, current and over voltage or under voltage. Please see following illustration.

USB output port can be connected to a data line, a discharge resistor or the like cable devic
comprising a data communication function, the data does not affect the data transmission line.

Test specifications, voltage can not exceed 7V, current can not exceed 3.5A.
Note:When the voltage is lower than 4.7V on the instrument display or higher than 5.3V,
the LCD screen will flash, it does not affect the use.

Application examples
Because mobile phones and digital devices at low battery or full charge, the current and voltage is not a stable value,
the application example of the discharge
device is a USB 1A or 2A discharge resistor.

Package included:

1 X LCD USB Voltage Current Detector Mobile Power USB Charger Tester Meter

PaymentShippingReturnsFeedbackcontact us

We accept PayPal only.

Payment must be received within 3~5 business Days from the date of purchase.

Please leave note in PayPal when making the payment if you have any special request (colors/size).

Orders will be processed instantly and dispatched in 1-2 business day normally, so we do NOT accept any Email/ Message note before or after you place orders.

Orders will be processed and dispatched within 24-48 hours after payment is clear.

We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.

If you have not received your shipment within 30 business days from payment, please contact us. We will track the shipment and get back to you as soon as possible. Our goal is customer satisfaction!

We offer 30 days return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product and would like to return.

All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your eBay ID.

We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.

Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

Please DON'T leave negative or neutral feedback if you haven't received item in 7 days, because we have mentioned the shipping time repeatedly.

1. Sent an email by ebay to tell us what you need(like a refound,do not receive your item ect.)

2. Add this facebook ID,if you want to know more about items information,other wise just sent email to us in ebay.thank you.

DataCaciques