Yamaha PX10 Power Amplifier (1200 Watts x 2 at 4 Ohms)
Brand New in Original Packaging
SKU: PX10-YAM

  • Driven by a Class-D amplifier engine
  • Suitable for a broad range of sound reinforcement
  • More lightweight, yet reliable design
  • Offers both Basic and Advanced setup modes
  • Config Wizard allows users to save even more time
  • Equipped with both XLR and TRS inputs
  • Fast and easy to configure panel settings
  • Also features a panel locking function
  • Durable to stand up to extended road use

The Yamaha PX10 Power Amplifier combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. This amplifier continues this tradition of excellence, utilizing Yamaha’s renowned digital signal processing technology and unparalleled professional audio expertise to achieve a light, durable design, capable of delivering the maximum output power to the speakers while simultaneously protecting them with optimized processing.

Class-D Amplifier

Driven by a Class-D amplifier engine, the Yamaha PX10 Power Amplifier is suitable for a broad range of sound reinforcement and installation environments. This engine concentrates all the necessary functions into a single custom LSI chip and uses PLL technology to control transfer characteristics in real-time, achieving impressive sound quality and power. This single-chip architecture offers higher output and improved performance in a more lightweight, yet reliable design. A combination of cutting-edge technology and an exhaustive component selection process make the amplifier supremely efficient amplifiers with low noise, reliable protection features, and above all, outstanding sound quality.

Sophisticated Signal Processing

This amplifier comes with flexible onboard crossover, filters, delay, limiter, and PEQ (fixed preset) functions as standard, allowing quick and easy system setup via the LCD, without the need for any additional outboard gear. It also features Yamaha’s intelligent D-CONTOUR multi-band dynamic processing, allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.

Easy, Intuitive Setup

To accommodate users with varying levels of sound reinforcement experience, this amplifier offers both Basic and Advanced setup modes. Basic mode allows even inexperienced users to easily configure a system that meets their needs, while Advanced mode offers experienced users more precise control over every aspect of their sound. It features eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers

Smart Configuration Wizard

The Config Wizard allows users to save even more time during system setup by assigning optimized speaker settings that match your system configuration simply select the appropriate filter and crossover for each speaker, and Config Wizard will do the rest. Config Wizard also features presets* specifically tuned for each model in Yamaha’s extensive lineup of passive speakers, including the popular CBR, Club, Installation, and VXS/VXC series, and an advanced mode that allows more detailed configuration of parameters such as input routing, input sensitivity, amp gain, and speaker impedance.

Flexible Connectivity, Durable Construction

Equipped with both XLR and TRS inputs, and binding post, SpeakON, and phone outputs, this amplifier offers the flexibility needed for a variety of setups and environments, and the durability to stand up to extended road use thanks to the sturdy chassis and carrying handle design.

Utilities for Safe and Secure Operation

It is fast and easy to configure panel settings, monitor amplifier status, and transfer data via USB, and also features a panel locking function to keep your settings safe. Users can even export information such as internal devices and log data to USB for rapid troubleshooting should difficulties arise.

  • Yamaha PX10 Power Amplifier (1200 Watts x 2 at 4Ohms)
  • USB Cover
  • Specification Sheet
  • AC Cable (2m)
  • Owner's Manual
  • Limited 1-Year Warranty

Yamaha PX10 Power Amplifier


100V Models

  • Output power; 1kHz Non-clip 20msec Burst Both channels driven
    • 8 Ohms: 1000W x 2
    • 4 Ohms: 1200W x 2
    • 2 Ohms: 700W x 2

120V Models

  • Output power; 1kHz Non-clip 20msec Burst Both channels driven
    • 8 Ohms: 1000W x 2
    • 4 Ohms: 1200W x 2
    • 2 Ohms: 700W x 2

220V-240V Models

  • Output power; 1kHz Non-clip 20msec Burst Both channels driven
    • 8 Ohms: 1000W x 2
    • 4 Ohms: 1200W x 2
    • 2 Ohms: 700W x 2

General Specifications

  • Sampling frequency rate:
    • Internal: 48kHz
  • A/D D/A converters: AD/DA: 24-bit linear, 128 times over sampling
  • Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)         
  • Frequency response: ±1.0dB (1W, 8 Ohms, 20Hz to 20kHz)
  • S/N ratio: 101dB (A-weighted, 8 Ohms, Gain setting = +14dBu)
  • Crosstalk: Less than -60dB (Half Power, 8 Ohms, 1kHz, Vol max input 150 Ohms shunt)
  • Voltage gain/sensitivity:
    • 8 Ohms volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)        
  • Maximum input voltage: +24dBu
  • Input impedance: 20 kOhms (Balance), 10 kOhms (Unbalance)
  • I/O Connectors:
    • Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4 inch PHONE(TS) x2
    • Line input: XLR-3-31 x2, 1/4 inch PHONE(TRS) x2
    • Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp          
  • Indicators: POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
  • Processors: Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz to 20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
  • Latency: 1.5 msec (Analog Input to Speakers)
  • Presets: 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)
  • Protection circuit:
    • Load protection: Power switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)   
    • Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
    • Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown         
  • Amplifier class: Class D, Balanced output circuit (BTL)
  • Cooling: 16-step variable speed fan x 2, front to rear airflow
  • Power requirements: Depending on the area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz (Verified as operating at rated power voltage +/- 10% voltage.)
  • Power consumption: 310W (1/8 MAX power, 4 Ohms, Pink noise at all channels), 60W (4 Ohms, Idling)
  • Dimensions:
    • Weight: 18-7/8 inch (480mm)
    • Height: 3-7/16 inch (88mm), 2U
    • Depth: 15-2/8 inch (388mm)
  • Net weight: 16.31 lb (7.4 kg)
  • Temperature:
    • Operating Temperature: 0-degree-Celsius to +40-degree-Celsius
    • Storage temperature: -20-degree-Celsius to +60-degree-Celsius

Shipping for this item is free in the Continental US Lower 48 states only. Shipping Fees include all handling & insurance.

  • For Domestic Shipping to the Lower 48 States: All shipping prices include shipping, handling and insurance (if necessary).
  • For Domestic Shipping to Alaska, Hawaii, Puerto Rico, US Territories, APO & FPO: For many items to these destinations there will be an additional shipping fee. The shipping costs may be calculated on the Shipping and Payments tab by entering your Zip Code. Free shipping is for the lower 48 only
  • For International Shipments: All international orders are managed through eBay's Global Shipping Program. Please see the Shipping Tab for full costs.
  • Hotels: Unfortunately at this time we do not ship to hotels.

Paypal: PayPal is our preferred method of payment for all of our eBay sales. For customer service please contact us through eBay Messages

Immediate payment via PayPal is required for all Buy It Now items. For all Best Offers, payment is required within 3 days. If you need special arrangements, please contact us through eBay messages. After your order has been shipped, you will receive an e-mail with the name of the carrier and the tracking number.

Returns are permitted if you are not satisfied with your purchase and must be initiated by the buyer within 30 days from delivery date.

For Domestic Purchases:

If you are not satisfied with your purchase, you may return it (see exceptions in Paragraph F below), within 30 days of receipt, for a refund or replacement - subject to the following:

a) Contact us through eBay messages or the returns link to receive a Returned Merchandise Authorization (RMA) number to ensure proper handling of the return and/or replacement.

b) In order to be eligible for a full refund, less shipping expenses, your returned merchandise must be in its original new condition, as shipped, with all packaging, manuals, and paperwork intact and unaltered. Items which have been opened are returnable, however they will carry a restocking fee.

c) Customers remain responsible for the shipping and handling expenses incurred in shipping the item to them. If an item is offered with "Free Shipping," this means we are paying the freight on your behalf. If that product is returned for a refund, the shipping expenses incurred, will be deducted from the refund. If an item is refused, the carrier bills us for shipping both ways, and these expenses incurred on your behalf need to be deducted from your refund

d) All returns are subject to inspection. Products returned must be in brand new condition, as per Paragraph b), if not, it may be deemed non-refundable or will be subject to at least a 15% restocking fee. If your return is missing accessory components, or shows signs of wear - restocking fees will be higher. For specific restocking fees that may be applicable to your return, please contact us through eBay messages.

e) Returns should be packed in an outer shipping carton, not just the original box/packing of the product. The RMA# should be clearly inscribed on the shipping label. A copy of your invoice and Order # should be included, and your return should be insured, with shipping costs pre-paid. We cannot accept any COD shipments.

f) There are product categories which are not returnable due to hygienic or sanitary as required by manufacturers. If your items is a consumable good or is has been locked by a manufacturer such as Apple or HP the return will not be accepted

For Warranty information, merchandise lost / any other issues in transit, or order cancellations, please contact us through eBay Messages. In an event where there is an error regarding a price error or description, we will notify you ASAP. In this event there will be no obligation to proceed with the purchase. Any amount charged to the customer will be 100% refunded.

For International Purchases:

Returns will be accepted within 30 days of the receipt of the item. In order to be eligible for a refund your returned merchandise must be in its original unopened condition, as shipped, with all packaging, manuals, and paperwork intact and unaltered. Items removed from their 'blister-pack' display packaging are non-refundable. 

International Buyers must pay return shipping via the same method originally shipped.