2.8 Inch
At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch
Resolution 240*320
Dot matrix: 240X320
Display Interface:4-wire SPI
Touch:Resistive touch (pen included)
Effective display area:43.2x57.6(mm)
PCB backplane size:50.0x86.0(mm)
Weight (including packaging):43(g)
ILI9341 is a 262,144-color single-chip SOC driver for a-TFT liquid crystal display with resolution of 240RGBx320
dots, comprising a 720-channel source driver, a 320-channel gate driver, 172,800 bytes GRAM for graphic
display data of 240RGBx320 dots, and power supply circuit.
ILI9341 supports parallel 8-/9-/16-/18-bit data bus MCU interface, 6-/16-/18-bit data bus RGB interface and
3-/4-line serial peripheral interface (SPI). The moving picture area can be specified in internal GRAM by window
address function. The specified window area can be updated selectively, so that moving picture can be
displayed simultaneously independent of still picture area.
ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to
generate voltage levels for driving an LCD. ILI9341 supports full color, 8-color display mode and sleep mode for
precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small
size portable products such as digital cellular phones, smart phone, MP3 and PMP where long battery life is a
major concern.
Features
Display resolution: [240xRGB](H) x 320(V)
Output:
720 source outputs
320 gate outputs
Common electrode output (VCOM)
a-TFT LCD driver with on-chip full display RAM: 172,800 bytes
System Interface
8-bits, 9-bits, 16-bits, 18-bits interface with 8080-Ⅰ/8080-Ⅱ series MCU
6-bits, 16-bits, 18-bits RGB interface with graphic controller
3-line / 4-line serial interface
Display mode:
Full color mode (Idle mode OFF): 262K-color (selectable color depth mode by software)
Reduce color mode (Idle mode ON): 8-color
Power saving mode:
Sleep mode
On chip functions:
VCOM generator and adjustment
Timing generator
Oscillator
DC/DC converter
Line/frame inversion
1 preset Gamma curve with separate RGB Gamma correction
Content Adaptive Brightness Control
MTP (3 times):
8-bits for ID1, ID2, ID3
7-bits for VCOM adjustment
Low -power consumption architecture
Low operating power supplies:
VDDI = 1.65V ~ 3.3V (logic)
VCI = 2.5V ~ 3.3V (analog)
LCD Voltage drive:
Source/VCOM power supply voltage
DDVDH - GND = 4.5V ~ 5.8V
VCL - GND = -1.5V ~ -2.5V
Gate driver output voltage
VGH - GND = 10.0V ~ 16.0V
VGL - GND = -5.0V ~ -10.0V
VGH - VGL ≦ 28V
VCOM driver output voltage
VCOMH = 3.0V ~ (DDVDH – 0.2)V
VCOML = (VCL+0.2)V ~ 0V
VCOMH - VCOML ≦ 6.0V
Operate temperature range: -40℃ to 85℃
a-Si TFT LCD storage capacitor : Cst on Common structure only
At least 4 IO drivers are required without touch, with a minimum of 9 IO drivers with touch
Resolution 240*320
Dot matrix: 240X320
Display Interface:4-wire SPI
Touch:Resistive touch (pen included)
Effective display area:43.2x57.6(mm)
PCB backplane size:50.0x86.0(mm)
Weight (including packaging):43(g)
ILI9341 is a 262,144-color single-chip SOC driver for a-TFT liquid crystal display with resolution of 240RGBx320
dots, comprising a 720-channel source driver, a 320-channel gate driver, 172,800 bytes GRAM for graphic
display data of 240RGBx320 dots, and power supply circuit.
ILI9341 supports parallel 8-/9-/16-/18-bit data bus MCU interface, 6-/16-/18-bit data bus RGB interface and
3-/4-line serial peripheral interface (SPI). The moving picture area can be specified in internal GRAM by window
address function. The specified window area can be updated selectively, so that moving picture can be
displayed simultaneously independent of still picture area.
ILI9341 can operate with 1.65V ~ 3.3V I/O interface voltage and an incorporated voltage follower circuit to
generate voltage levels for driving an LCD. ILI9341 supports full color, 8-color display mode and sleep mode for
precise power control by software and these features make the ILI9341 an ideal LCD driver for medium or small
size portable products such as digital cellular phones, smart phone, MP3 and PMP where long battery life is a
major concern.
Features
Display resolution: [240xRGB](H) x 320(V)
Output:
720 source outputs
320 gate outputs
Common electrode output (VCOM)
a-TFT LCD driver with on-chip full display RAM: 172,800 bytes
System Interface
8-bits, 9-bits, 16-bits, 18-bits interface with 8080-Ⅰ/8080-Ⅱ series MCU
6-bits, 16-bits, 18-bits RGB interface with graphic controller
3-line / 4-line serial interface
Display mode:
Full color mode (Idle mode OFF): 262K-color (selectable color depth mode by software)
Reduce color mode (Idle mode ON): 8-color
Power saving mode:
Sleep mode
On chip functions:
VCOM generator and adjustment
Timing generator
Oscillator
DC/DC converter
Line/frame inversion
1 preset Gamma curve with separate RGB Gamma correction
Content Adaptive Brightness Control
MTP (3 times):
8-bits for ID1, ID2, ID3
7-bits for VCOM adjustment
Low -power consumption architecture
Low operating power supplies:
VDDI = 1.65V ~ 3.3V (logic)
VCI = 2.5V ~ 3.3V (analog)
LCD Voltage drive:
Source/VCOM power supply voltage
DDVDH - GND = 4.5V ~ 5.8V
VCL - GND = -1.5V ~ -2.5V
Gate driver output voltage
VGH - GND = 10.0V ~ 16.0V
VGL - GND = -5.0V ~ -10.0V
VGH - VGL ≦ 28V
VCOM driver output voltage
VCOMH = 3.0V ~ (DDVDH – 0.2)V
VCOML = (VCL+0.2)V ~ 0V
VCOMH - VCOML ≦ 6.0V
Operate temperature range: -40℃ to 85℃
a-Si TFT LCD storage capacitor : Cst on Common structure only
