Store Categories
1. driver chip: L298N dual H-bridge driver chip
2. drive section terminal supply area VMS: +5V ~ +35V
3. drive section peak current Io: 2A / Bridge
4. logical part of the terminal supply area Vss :4.5-5.5V
5. logical part of the operating current range: 0 ~ 36mA
6. Control signal input voltage range: 4.5-5.5V is high level, 0V is low level
7. Maximum power consumption: 20W
8. Storage temperature: -25C ~ +130C
9. Driver Board Size: 55mm*60mm*30mm
10. Other functions: control direction indicator, power indicator, current sensing, logic portion plate to take power interface.
Package Included:1x L298N DC Motor Driver Module
L298N DC Motor Driver
L298N as main chip, ST corporation production.
Low heat,outstanding anti-interference performance.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power
supply.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Specification:
Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W
Size:43 x 43 x 26mm
Net weight: 26g
Package weight:36g
Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Package Included:1 x Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC for Arduino
L298N DC Motor Driver - style2
1.Double H bridge drive
2.Chip L298N (ST NEW)
3.Logical voltage 5V
4.Drive voltage 5V-35V
5.Logical current 0mA-36mA
6.Drive current 2A(MAX single bridge)
7.Storage temperature -20 to +135
8.Max power 25W
9.Weight 30g
10.Size:43*43*27mmThis module is integrated with a built-in 5V power.When the drive voltage is 7V-35V,
it can enable the onboard 5V logic power supply;afterthe power supply,don't input
voltage in the interface+5V power supply,but you can lead the 5V for external use.
when ENA enable IN1 IN2 control OUT1 OUT2
when ENB enable IN3 IN4 control OUT3 OUT4
Package included:1x L298N DC and stepper Motor dual drive module for Arduino
Green L298N DC Stepper Motor Driver
100% band new and high quality
Using L298N made by ST company as the control chip, the module has such characteristics as strong driving ability, low
calorific value and strong anti-interference ability.
Built-in 78M05,get power from drive power, however, when drive power over12V, please use the external 5v power as power
supply.
Large capacity filter capacitance, afterflow protection diode, more stable and reliable.
Double H bridge drive
Chip L298N
Logical voltage 5V
Drive voltage 5V-35V
Logical current 0mA-36mA
Drive current 2A(MAX single bridge)
Storage temperature -20℃ to +135℃
Max power 25W
Size: 55x50x27mm
Package Contents:1 x Double H bridge drive
EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
We are professional Business & Industrial DIY Module part store. Follow and save our store,We will provide the best service and high quality-low price items for you.Save more