Product Description

  • (1) DIAGNOSIS + SOLUTIONS - The JS series of Jump Starter with OBD2 scanners are designed to help users diagnose their cars, while also solving some common and urgent problems. MUCAR JS502 car jump starter not only helps you check error codes and get vehicle reports, but it also helps you start your car when the battery runs out.
  • (2) START DEAD VEHICLES - This JS502 Car Battery jumper enhances the battery structure and configuration, the voltage is increased by 10%, and the peak current of the starting current reaches 2000A. So it can safely jump-start most 12V vehicles(up to 7.0 gas and 3.0L diesel engines). Suitable for SUVs, pickups, Trucks, and boats with a 12V battery. It also comes with smart cable clamps and built-in 10 protection programs.
  • (3) ENHANCED BATTERY BOOSTER SYSTEM - Li-battery's safety is very high in the current battery system. JS502 battery booster pack uses High magnification A-level battery cells, which can withstand the strong current impact at the moment of car startup, making it less prone to accidents. The built-in smart chip can charge safely and stably without damaging the digital devices of your car. It can achieve 20 times jump-start on a single charge and works even in extreme climates -4~140℉.
  • (4) OBD II UNIVERSAL CAR CODE READER - More than a car jumper, JS502 (OBD MODULE) possesses up to full OBD2 functions. Including Read Codes, Erase Codes, MIL Fault Indicator Light, Live Data, EVAP System Test, On-Board Monitor Test, View Freeze Frame, O2 Sensor Test, Vehicle Info, I/M Readiness, and DTC Code Look-up. Built-in DTC library with 100,000+ detailed definitions. MUCAR JS502 can help you check error codes and get the vehicle report, saving you time and money for extra.
  • (5) NO FEES & LIFETIME CUSTOMER SUPPORT - Your OBD scanner is currently installed with the latest version and all software is free. Auto code reader supports Review & Print diagnostic reports from the Auto fix, connecting to a computer via USB. The JS501(OBD MODULE)scanner for car works on most OBD-II-compliant vehicles after 1996, compatible with OBD2/EOBD protocols. 

 

MUCAR JS502 supports OBD2 basic diagnostic function+emergency start (battery 18000MA)
Starting current: 600A
Peak current: 2000A
Number of starts:>30
Charging time:<4.5 hours
Charging current: 5V 2A
USB output: 5V 3A, 9V 2A

 

MUCAR JS502 support Full OBD2 function

(1) Live Data Stream
CDL20 check engine code reader Live Data are displayed in a time-based chart to help customers to better analyze the abnormal parameter.This function will let you see engine performance information, if there are any trouble codes or issues with your engine or ECU.

(2) DTC Library Lookup
The built-in DTC database allows you to query your confused fault codes anytime, anywhere. By explaining, you can clearly know why your car is sick. In this way, the problem can be solved faster, the fault code can be cleared, and the safe driving of the car can be guaranteed.

(3)Know Vehicle Infomation
With this OBD2 barcode reader, you can easily access your car's ECU and retrieve information for more accurate vehicle diagnostics. Save time by not having to look around for VIN.

(4)Freeze Frame Data
When the emission-related fault occurs, it'll check the certain vehicle conditions which are recorded by the on-board computer. It is intended to provide you with a guide as to where a fault might be occurring within a vehicle.

(5)O2 Sensor Test
Allows you to retrieve and view the O2 Sensor Monitor test results from the vehicle's onboard computer to view the most recently completed tests. Accurately identifies failures of oxygen sensors and vehicle emissions-related errors.

(6)EVAP System Test
Allows you to initiate a leak test of the vehicle's EVAP system to prevents fuel from evaporating out of your tank and contributing to smog.

(7)Save Your Money & Time
MUCAR engine code readers CDL20, A simple, affordable and easy-to-use diagnostic tool, this little device may save you money and trips to the mechanic by allowing you to.

(8)All-round Anti-drop
The CDL20 scanner for cars case provides 360-degree protection for the scanner, and is highly drop-resistant, unlike other diagnostic instruments that are easily broken. And the CDL20 is easy to carry, small in size, and can fit in a pocket.

(9)Faster, More, Better
With this OBDii scanner, the ARM32-bit chip is used, and other scanners use 8 or 16-bit. The 32-bit chip has a faster processing effect, which also determines that the CDL20 can store more diagnostic reports. Not only that, the CDL20 also has a built-in power protection circuit, and the power protection chip can protect the car circuit.

MUCAR JS502 Supports 8 languages and thousands of car models
English, French, West German, Russian, Italian, Portuguese, and Polish

MUCAR JS502 support  BOOSTER Function
The MUCAR MJS501 Automotive Battery Starter has a BOOSTER function that provides a boost to start a vehicle with a dead or damaged battery.
Just follow the steps below
1.long press the power on button to confirm that the host power indicator in more than 60% (more than 3 grams of power).
2. the red clamps clamp the positive (+) pole of the battery, the black clamps clamp the negative (-) pole of the battery.
3.Plug the battery cable connector into the car interface of the starter power supply.
4.Press the BOOST button on the smart battery clip.
5.Turn the ignition switch of the car to the START position.
6.After the car starts, unplug it.
7.Remove the battery clip clamp
 
Over-current protection, short-circuit protection, over-voltage protection, reverse charge protection, over-temperature protection, over-discharge protection, overcharge protection, reverse connection protection
 
Other Features:
Can charge cell phones/tablets and other electronic products
1.Choose the appropriate charging connector and adapter cable
2.Will put the USB-A OUT output port of the adapter cable, connect the charging connector to the hand/
Tablet PC and other electronic products. (Support output: 5V-3A, 9V-2A)
3.Touch the switch button to start charging your cell phone/tablet PC and other electronic products.

What's in the box
1* JS502 Jump Starter
1*TYPE-C data cable
1*MINI USB cable
1*instructions