A/C Oil and Dye Injector with R1234yf Snap Quick Coupler 1/4" SAE Hand Turn Instruction Rotate the inside cylinder clockwise to the top Unscrew the cover on the top of the smaller cylinder Pour the liquid (Refrigeration Oil / Fluorescent Dye / Leak Detection Dye) into the cylinder Tighten the cover If the cylinder is not full filled with oil, then discharge the air is needed. (Rotate the bigger cylinder counterclockwise until the oil flows out at the end of the hose.) Turn on the car air conditioner to the maximum air volume Attach the low pressure quick connector to the cylinder Locate the low pressure filler port of the car air conditioner and connect the other end of the quick connector. Rotate the cylinder counterclockwise to inject the oil into the air conditioning system Product Parameters Thread Size: 1/4" SAE Material: aluminum alloy cylinder, rubber tube, pure copper connector Hose pressure: 600-3000PSI Capacity: 60ml / 2 oz Package Includes 1X Oil Injector cylinder 1X R134a quick coupler low side 1X R1234yf quick coupler low side 1X O ring 1X Operating Manual |