Wheel Hub Assembly Specification
| Hub Bolt Circle Diameter | 4.96 in |
| Bolt Circle Diameter | 5.50 in |
| Number of Bolt | 3 |
| Bolt Size | M14x1.5 |
| Flange Diameter | 7.09 in |
| Number of Splines | none |
| Wheel Pilot Diameter | 3.06 in |
| Wheel Stud Size | M14x1.5 |
| Flange Offset | 1.965 in |
| Notes | Front Left or Right |
|
Features & Benefits:
- Low runout reduces noise and vibration to improve braking performance.
- Advanced seal design to help prevent mounting damage and provide enhanced protection for extended bearing life and durability.
- Advanced sensor technology monitors wheel speed Anti-lock braking system (ABS).
- After heat treatment, the surface is hardened to ensure high temperature resistance and durability.
- Contains high quality grease to help improve performance and extend bearing life: reduce torque and temperature, make larger bearing roller traction, enhance protection against wear, rust and pollution.
1.Precise Fitment
2.Meet or Exceed OEM Standards
3.Premium Quality Material
4.Easy Installation
1.Remove the wheel cover and wheel tire
2.Remove the brake caliper
3.Remove the hub and axle nut
4.After removing, put the new bearing
5.Reinstalling the abs sensor and the axle nut
6.Installing the caliper bracket and rotor
7.Installing the brake caliper
8.Reinstall the wheel
Wheel hub are low maintenance parts.Hub bearings need regular inspection,It will wear out gradually during use, which may lead to premature failure. Therefore, regular maintenance should be carried out to avoid any traffic accidents.Common signs of a bad hub unit include:
1.A humming, rumbling or growling noise that increases with acceleration
2.A loud constant whining or grinding noise when the vehicle is in motion
3.Excessive play in the steering wheel
4.Steering wheel vibration that changes with the vehicle speed or as the vehicle turns
5.ABS system malfunction
Richeerwheel@163.com
Wheel Hub Assembly Specification
| Hub Bolt Circle Diameter | 4.96 in |
| Bolt Circle Diameter | 5.50 in |
| Number of Bolt | 3 |
| Bolt Size | M14x1.5 |
| Flange Diameter | 7.09 in |
| Number of Splines | none |
| Wheel Pilot Diameter | 3.06 in |
| Wheel Stud Size | M14x1.5 |
| Flange Offset | 1.965 in |
| Notes | Front Left or Right |
|
Features & Benefits:
- Low runout reduces noise and vibration to improve braking performance.
- Advanced seal design to help prevent mounting damage and provide enhanced protection for extended bearing life and durability.
- Advanced sensor technology monitors wheel speed Anti-lock braking system (ABS).
- After heat treatment, the surface is hardened to ensure high temperature resistance and durability.
- Contains high quality grease to help improve performance and extend bearing life: reduce torque and temperature, make larger bearing roller traction, enhance protection against wear, rust and pollution.
1.Precise Fitment
2.Meet or Exceed OEM Standards
3.Premium Quality Material
4.Easy Installation
1.Remove the wheel cover and wheel tire
2.Remove the brake caliper
3.Remove the hub and axle nut
4.After removing, put the new bearing
5.Reinstalling the abs sensor and the axle nut
6.Installing the caliper bracket and rotor
7.Installing the brake caliper
8.Reinstall the wheel
Wheel hub are low maintenance parts.Hub bearings need regular inspection,It will wear out gradually during use, which may lead to premature failure. Therefore, regular maintenance should be carried out to avoid any traffic accidents.Common signs of a bad hub unit include:
1.A humming, rumbling or growling noise that increases with acceleration
2.A loud constant whining or grinding noise when the vehicle is in motion
3.Excessive play in the steering wheel
4.Steering wheel vibration that changes with the vehicle speed or as the vehicle turns
5.ABS system malfunction
Richeerwheel@163.com