The NanoPi R1 is a complete open source board developed by FriendlyElec for loT applications.
The NanoPi R1 has a Gbps and a Fast Ethernet ports, onboard WiFi & Bluetooth module. The standard version has 1GB RAM (optional 512M RAM) and 8GB eMMC(optional 0GB eMMC).
It has two USB 2.0 ports and one TTL serial port which can be extended to connect 3G/4G devices etc. The NanoPi R1 works with Linux 4.14 mainline kernel, UbuntuCore and FriendlyWrt. This makes it highly adaptable to various software applications and can be widely used in IOT applications.
Note: The NanoPi R1 takes 5V power input from its MicroUSB port. FriendlyElec designed and released a customized black metal housing for it.
| CPU | Model: Allwinner H3 Number of Cores: Quad-core Frequency: 4 x Cortex-A7 Up to 1.2GHz |
| Memory | RAM: 512MB(16-bit)/1GB(32-bit) |
| Storage | eMMC: NC(RAM: 512MB) /8GB (RAM: 1GB) MicroSD Slot: MicroSD x1 for external storage up to 128GB |
| Connectivity | Ethernet: 10/100M Ethernet x1 10/100/1000M Ethernet x1 WiFi: based on AP6212 Module, 802.11b/g/n, with SMA antenna interface Bluetooth: 4.0 dual-mode |
| USB | MicroUSB x1: MicroUSB 2.0, OTG & Power In USB Host: 2.0 Type-A x2 |
| Pin-header | Serial Debug Port: 2.54mm pitch 3-pin-header |
| Connector | UART x1: 2.54mm pitch 4-pin-connector |
| LED | PWR/STAT LED(Red) x1 LED(Green) x2 |
| Others | Button: User button x 1 RTC-BAT x1: Input Voltage 3.0~3.6V Working Temperature: -20℃ to 70℃ |
| Power | MicroUSB DC 5V/2A |
| OS Support | FriendlyCore 16.04(based on UbuntuCore-16.04) FriendlyWrt 19.07.1(Linux-4.14 + U-boot-2017.11) eFlasher |
| Kernel version | Linux-4.14-LTS U-boot-2017.11 |
| PCB | 6 Layer |
| Dimension | 50.5 x 60mm |
| Weight | 33g(only board)/125g(with metal case & heat sink) |