DESCRIPTION:
For 14 to 24 Inches
SPECIFICATIONS:'
- 100% Brand New and High quality
- Recommended Size: 14-24 inches (The actual size depends on the pitch)
- Load: 10kg
- Material: cold rolled sheet
- Thickness: Approx 1.5mm
- Pitch: size 45*45 75*75mm
- Max Mounting Dimensions:100mm x 100mm
- Adjustable angle:(Up and down)180°;(Left to right)180°
- Tilt & Swivel: -180 to +180 degree
- Rigorously stress-tested to ensure security, safety, and peace of mind.
- Distance from the wall: Approx 100mm
For 17 to 42 Inches
SPECIFICATIONS:
- TV SIZE RANGE: 17"- 42" - Max TV
- WEIGHT: 55 lbs
- MOUNTING PATTERN: 200x200mm, 200x100mm, 150x150mm,100x100mm, 75x75mm
- Tilt, Swivel and Rotate function: +5°/-15° Tilt, +/180° Swivel
For 17 to 55 inches
SPECIFICATIONS:
- Horizontal Pivot/Swivel: -90 to +90 degrees (approx)
- Vertical Tilt: +15 degrees to -15 degrees
- Distance from wall: 39mm to 420mm
- Capacity Weight:35kg
- Suits size standards 400x400mm,400x300mm,300x300mm,300x200mm , 200x200mm, 200x100mm, 100x100mm, and 75x75mm
For 26-55 Inches
SPECIFICATIONS :
- Material : 2.0mm Cold Rolled Steel
- TV Size : 26-55 Inches
- Distance from the Wall : 25mm
- Maximum Load Capacity : 50KG (110LBS)
- Tilt : +/- 10 Degree
- Supported Sizes : 200x200mm, 300x300mm, 400x200 &400x400mm.
SPECIFICATIONS :
- Material : 2.0mm Cold Rolled Steel
- TV Size : 26-63 Inches
- Maximum Load Capacity : 50KG (110LBS)
- Supported Sizes : 200x200mm, 200X400mm,300x300mm, & 400x400mm.
SAFETY INSTRUCTIONS :
- All TV Wall Brackets should be installed on concrete wall, solid brick wall and solid wood wall. Do not install on hollow and floppy walls.
- Tighten the screw so that wall plate is firmly nattached, but do not over tighten. Over tightening can damage the screws,reducing their holding power.
- Do not remove screw or loosen screw from your TV Screen until it is no longer engaged with the mount. Doing so may cause the screen to fall.
- All TV Wall mounts should be installed by trained installer specialist.
For 14-42 inches(Fixed)
SPECIFICATIONS:
- Material: Cold Rolled Plate.
- Material thickness: 1.2MM.
- Suit for screen size: 14"-42"
- Max size : 50x50mm,100x100mm,200x100mm, 200x200mm.
- Up and Down Tilt: -15°
- Distance from Wall: 2.5cm
For 32-70 inches (Tilt)
SPECIFICATIONS :
- Universal Plasma / LCD Wall Mount TV bracket
- Suitable for 32” to 70”
- Fits for most 32” to 70” flat panel TV
- size Compliance: 200 X 200mm, 200 X 400mm, 300 X 300mm, 400 X 400, 600 X400
- Load Capacity : 110 lbs (50 KG)
For 32-70 inches (Fixed)
SPECIFICATIONS :
- Material : Cold Rolled Plate
- Material thickness : 1.4MM
- Suit for screen size : 32”-70" Inches
- Maximum Size : 200x200mm, 200x400mm, 300x300mm, 600x400mm
- Weight Capacity : 50kg
For 26-60 inches (Fixed)
SPECIFICATIONS :
- Material: 1.8mm Cold Rolled Steel
- TV Size: 26-60 Inches
- Maximum Load Capacity: 50KG (110LBS)
- Supported Sizes: 75x75,100x100,200x200,400x200,300x300,400x400
For 32-65 inches
Fits any TV size with the following size patterns:
200 x 200 mm
300 x 200 mm
300 x 300 mm
400 x 200 mm
400 x 300 mm
400 x 400 mm
Please measure your size prior to purchase, this will fit a TV with a maximum mounting pattern of 400mm horizontally and 400mm vertically.
Maximum weight 35kg
Distance to the wall is 19.5mm.
For 15-42 flat mount
SPECIFICATIONS :
- TV Size: 15-42".
- size : Minimum - 50x50mm, Maximum - 300x200mm.
- Load Capacity : 40Kg.
- size Compatibility : 50x50mm, 75x75mm, 100x100mm, 200x200mm, 300x200mm.