Welcome
9003 For Harley FLSTFB Fatboy Lo 10-16 H4 LED Headlights Hi/Low Beam White Bulbs
![]() ![]() ![]() ![]() ![]() ![]() Product Description
Feature:
--- 2020 NEW SERIES LED HEADLIGHT BULBS KIT --- H4/9003/HB2 60W 6000K PURE WHITE LIGHT HI/LOW BEAM. --- 200% brighter than halogens Bulbs,Provide Reasonable distance & Wide of view. --- Copper Plate Chip,Increase 100% Heat Dissipation,Protect LED Chips,Extend Lifespan --- 9000 rpm Fan To Accelerate Heat Dissipation,Increase 80% Heat Dissipation --- Adopted opening high speed cooling fan design, less noise and better heat dissipation. --- 2 sides emitting ensure for the better beam pattern and brightness. --- Customized latest CSP chips, light efficiency increased by 25% comparing with ordinary chips --- Our LED light come with exactitude light beam angle, no dazzling, no influence for the coming driver at left in front. --- This model don't come with CANBUS Error Free function, Please contact us if you need CANBUS model. Specification: Bulbs Size: H4/9003 Power: 30W/bulb Lumen: 6000 lm/Pair Voltage:12V Color temperature: 6000K White Package Include: 2X LED Bulbs Install Caution: 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the Headlight when adjusting the bulb. NOTE: This item wasn't exist self-decoding/self-Canbus【anti-flashing /anti-warning】function and DRL【Daytime running light】 function!!! -- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases: 1, the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked). 2, the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked) 3,The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked). situation 1: use this case to judge whether it need to be decoded. situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test) Feasible Solution: 1, install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger. 2, install the resistor, you need professional installation. 3, using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect. FAQ
Q1: Will the bulbs suitable for my vehicle?
1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above.
2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand.
3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit!
Q2: What if I encounter a dashboard error message or flickering?
A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem.
Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor.
Q4: How to get the best light output?
A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page.
Q5: What should I do if there is a quality problem?
A: Please send ebay message to us, we will solve any problems for you as soon as possible.
Q6: The bulbs doesn't fit my vehicle.
1. The bulbs size maybe wrong, pls double check before order.
2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you.
Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.
![]() DISCLAIMER
Disclaimer: mark2brother parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
![]() Shipping Policy
Return & Refund
Feedback
![]() About Item
Customer Satisfaction
Visit Our Store For Best Deal! Mark2brother Store
|