Name: water level control valve
Product material: stainless steel
Screw specifications:1/2 inch
Screw material: stainless steel
Size: 49*60mm/ 1.93*2.36*inch
Pressure range: 0.210KG
Applicable temperature: 0100°C
Applicable medium temperature: 180°C
High temperature medium temperature: -20°C100°C
Installation maximum inclination: 30°
Working pressure range: 1.0MPa
Residential tap water pressure: 030.5MPa
List: 1*float valve, 1*belt
Installation Notes
1. Applicable water pressure range: 0210KG (be sure to use it under reasonable circumstances)
2. The product must be installed vertically on a horizontal plane, and the float valve must be downward during installation
3. Please fix the water pipe on a horizontal cover first, and then install the product on the water inlet pipe
4. When in use, the shut-off valve of this valve must be fully opened
5. If two float valves are installed in one pool, they should be kept on the same level
6. Please clean the impurities in the pipe before installation to avoid impurities from clogging the ball valve
7. When the product is installed inside, there will be water dripping at the bottom of the ball valve, which is a normal phenomenon