1. Description:
KCX_BT002
is a audio module that integrates Bluetooth, audio and Bluetooth phone
calls. It supports the market, all kinds of intelligent mobile phone
player to play music, voice calls, telephone / hang up call / redial
last call function.
You
just need to put this codec into your product, and you can upgrade your
regular wired audio products to wireless Bluetooth audio products.
2. Typical applications:
1>. Home speakers change Bluetooth speakers
2>. Sound box maintenance and upgrade
3>. Car player upgrade
4>. Computer speaker upgrade
3. Electrical characteristics:
Characteristics | Minimum value | Reference value | Maximum value | Company |
Power Supply | 3.3 | 5 | 5.5 | V |
IP | 30 |
|
| mA |
FOP | 2400 |
| 2485 | MHz |
PRF |
|
| 2 | dBm |
Sensitivity |
| -85 |
| dBm |
Dynamic |
| 91 |
| dB |
THD+N |
| -70 |
| dB |
Crosstalk |
| -86 |
| dB |
Signal to Noise ratio |
| 90 |
| dB |
R_audio |
| 32 |
| ohm |
DAC output power |
| 150 |
| mW |
4. Features and advantages:
1>. Exceptional durability and coexistence.
2>. Through a variety of technologies to ensure the stability of Bluetooth transmission.
3>. Intuitive LED instructions.
4>. Voice prompt.
5>. Convenient and easy to use.
6>. The wireless transmission distance is not less than 10 meters.
5. Instructions for connection and pairing operations:
After
power to hear a voice prompt "Bluetooth mode", which means the module
into the Bluetooth mode, and opening mobile phone Bluetooth switch. Then
searching for nearby Bluetooth devices after a few seconds, you will
see the equipment named "Bluetooth Audio" Bluetooth device, click on the
link in the mobile phone side can connect Bluetooth mobile phone.
After the connection, the decode board broadcasts the voice prompt for "successful connection".
At
this point, open the phone player to play music, the phone's music can
be transmitted via Bluetooth wireless to the decoder board.
6. Connection operation step:
1>. Module power on
2>. Enter the phone system settings
3>. Turn on the Bluetooth switch
4>. Search for Bluetooth devices
5>. Connect Bluetooth
6>.After
the mobile terminal is connected with the Bluetooth module, the mobile
phone player is opened to play music, and the Bluetooth module can
output the music of the mobile phone.
7. About incoming calls
When
a mobile phone with a Bluetooth module has an incoming call, the module
sends out a voice to broadcast the caller's call number. You can answer
the call of the Bluetooth module short press P/P key, after the call,
call audio signal from the Bluetooth module external electret microphone
(to use the Bluetooth module calls the Bluetooth module to connect the
electret microphone, otherwise they can not hear the sound). In
addition, you can switch to any phone or Bluetooth module during the
call process.
8. Selection and connection of peripheral devices:
1>. power mode selection and connection
The
power input port +12V module, negative positive and negative GND are
respectively connected with the power supply, voltage regulator chip
78M05 between 1 and 3 foot short circuit for 5V power supply mode,
disconnect the power supply for the 12V mode (before electricity please
check the power supply voltage and power at appropriate intervals),
factory default for 12V mode.
2>. the connection of audio signals
The
AUDIO OUT:3.5mm audio interface is used to output stereo audio signals,
to connect external power amplifiers, or to directly connect
headphones.
9. Status indicator light:
1>.
The decoder board is equipped with status indicator (blue LED), which
is used to display the various working conditions of the module.
2>. Pairing: LED flashes fast (bright, out of 250ms)
3>. MP3 play: LED slow flash (bright 500ms, destroy 500ms)
4>. Pause status: LED often light
5>. Bluetooth playback: LED flashes two times every 2S
Specification:
Model: KCX_BT002
Power Supply: 3.3-5.0V
Working Current: 35mA
Channel: Stereo
bluetooth Version: 4.2
Working Frequency: 2400-2485MHz
Receiving Sensitivity: -85dBm
Size: approx. 3.1 x 1.4cm/1.22" x 0.55"