Welcome
For Honda Passport 2000-2002 LED Light Bulb Fog Light Driving Lamp 2x H3 Bulbs
Product Description
Features Brand: BEVINSEE
Operating Temperature: -40~80 degrees Color Temperature:6000K Pure White
Lifetime: Over 100,000 Hours
Working Voltage: DC 9-36V (Fit:12-24V Vehicles)
Lumen: 3000 LM/Kit; 1500 LM/Bulb
Wattage: 50W/Bulb
Sealed Housing: Dustproof and Waterproof
Warranty: 3 years
Install Caution FAQ Q1: Will the bulbs suitable for my vehicle? 1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above. 2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand. 3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit! Q2: What if I encounter a dashboard error message or flickering? A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem. Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor. Q4: How to get the best light output? A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page. Q5: What should I do if there is a quality problem? A: Please send ebay message to us, we will solve any problems for you as soon as possible. Q6: The bulbs doesn't fit my vehicle. 1. The bulbs size maybe wrong, pls double check before order. 2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you. Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.
DISCLAIMER
Disclaimer: mark2brother parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
Visit Our Store For Best Deal! Mark2brother Store
|
Features
-- BEVINSEE LED H3 LED Fog Light Bulbs
-- CSP LED Chips Built-in intelligent decoding system
-- 0.1S Instant Start Up
-- 2 Side LED Offering 360° Light Beam
-- The LED Headlight is 180% Brighter,Broader than Original Halogen
-- Super Low Load Resistance
-- Low power consumption
-- Strong Anti-interference performance
-- Power By Advanced Bright LED Circuitry
Specification
Install Caution
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the fog light when adjusting the bulb.
This model don't come with CANBUS Error Free function.
FAQ
Q1: Will the bulbs suitable for my vehicle?
1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above.
2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand.
3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit!
Q2: What if I encounter a dashboard error message or flickering?
A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem.
Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor.
Q4: How to get the best light output?
A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page.
Q5: What should I do if there is a quality problem?
A: Please send ebay message to us, we will solve any problems for you as soon as possible.
Q6: The bulbs doesn't fit my vehicle.
1. The bulbs size maybe wrong, pls double check before order.
2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you.
Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.