Mobula8 2S 85mm Digital HD Micro FPV Bwhoop
The New Mobula8 Digital HD Micro FPV whoop comes with a new flight controller which is specific for Digital HD CINEWHOOP. Built in UART ExpressLRS receiver and 12A 4-IN-1 BLheli_S ESC. The same Brushless motor and Gemfan 2023 propeller like the Mobula8 Analog version. Comes With for DJI O3, Walksnail avatar and HDZERO VTX option. Smooth flight and High definition video transmission would bring us exited FPV experience.
Model option | Mobula8 O3 | Mobula8 Walksnail | Mobula8 HDZERO | Mobula8 O3 Lite |
|
|
|
| |
Flight controller | CRAZYF405HD ELRS | CRAZYF405HD ELRS | CRAZYF405HD ELRS | CRAZYF405HD ELRS |
ESC | Onboard 12A 4-IN-1 | Onboard 12A 4-IN-1 | Onboard 12A 4-IN-1 | Onboard 12A 4-IN-1 |
Receiver | Onboard UART ELRS receiver ELRS V3.0 | Onboard UART ELRS receiver ELRS V3.0 | Onboard UART ELRS receiver ELRS V3.0 | Onboard UART ELRS receiver ELRS V3.0 |
VTX and Camera | For DJI O3 Air unit | Avatar HD Mini lite | HDZERO whoop lite bundle | NO VTX and Camera |
Frame | Mobula8 Frame | Mobula8 Frame | Mobula8 Frame | Mobula8 Frame |
Canopy | Mount bracket for DJI O3 | Molding canopy | Molding canopy | Mount bracket for DJI O3 |
Dimension | 120mmx120mmx45mm | 120mmx120mmx48mm | 120mmx120mmx47mm | 120mmx120mmx45mm |
Weight | 80g | 48g | 46.5g | 42.5g |
Features:
Digital HD FPV experience
New CrazyF405 ELRS HD flight controller
Powerful and Smooth
UART ExpressLRS receiver
Built-in blackbox for Gyroflow and PID Tune
Package includes:
Item Name | Qty |
Mobula8 Frame | 1 |
CrazyF4HD ELRS flight controller firmware target:BETAFLIGHTF4 | 1 |
EX1103 KV11000 brushless motor | 4 |
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) | 1 |
Option1: For DJI O3 Air unit | 1 |
Option2: Walksnail avatar HD Mini 1S lite kit | |
Option3: HDZERO Whoop Lite bundle | |
Option4: No VTX and camera version | |
Canopy | 1 |
Screw driver | 1 |
Spare parts specifications:
Motor | Mode: EX1103 KV11000 |
Propellers | Weight:0.88g |
Flight controller | MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) Built-in BMP280 Barometer Built-in 8MBp blackbox Built-in current meter sensor , current meter scale 470 |
Onboard 4in1 ESC | Power supply: 1-2S LiPo/LiPo HV Firmware target: Z-H-30 |
Onboard UART ExpressLRS 2.4GHz Receiver | Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz |
For DJI O3 Air Unit | Works withFor DJI FPV Goggles V2, For DJI Goggles 2, and For DJI FPV Remote Controller 2 D-Cinelike mode for Vivid Colors Flagship O3+ Video Streaming Customizable Canvas Mode 155° Super-Wide FOV 1/1.7-Inch Sensor Compact in Size |
Walksnail version | Camera Model Avatar lite camera Image Sensor 1/2.7”1nch Resolution 1080P/60fps,720P/120fps,720P/60fps Ratio 16/9 4/3 Lens 2.1mm FOV 170° Aperture F2.0 Shutter Rolling Rolling shutter Min.Illumination 0.001Lux Weight 1.8g Dimensions 14*14*16mm VTX Model Avatar mini 1s module Communication Frequency 5.725-5.850GHz Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface JST1.0*6(Power in)JST0.8*4(USB) Mounting Holes 25.5*25.5mm Dimensions 30*30*6.5mm Storage 8G Recording 1080p/720p Weight 5.1g Operating Temperature -20-40℃ Channels 8 Wide Power Input 3.1V-5V Supported FC System Betaflight OSD Canvas mode Bitrate 25mbps 50mbps Latency Average delay 22ms Antenna IPEX |
HDZERO Version | HDZero Nano Lite Camera 14x16x11 mm 1.5gram 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor Excellent low light performance Fov: 4:3: D:130° H:108° v:84° 16:9:D:122° H:108° V:65° HDZero Whoop Lite VTX 1-3S Input 25mW/200mW RF Output-SmartAudio Support 25.5x25.5 M2 Soft Mounting- Antenna Retention Removable Shielding Box- 32.5x32.5mm(29x29mm inner) 4.5grams/4mm Thickness (without shielding)
|
