Model: H11/H9/H8/H16
Usage: Headlight
Voltage: DC 11-30V
Power: 40W/per pair
Lumen: 4000LM/per pair
Color Temperature: 6000K
LED Chips: Chusyyray customized LED chips
Material: Heatsink aluminum shell
Fanless: yes, no noise
Lifespan: 30,000 hours
Waterproof Rate: IP65
Operating Temperature: -40℃~+90℃
Warranty: 5 years warranty
Package: 2x led bulbs
Usage: Headlight
Voltage: DC 11-30V
Power: 40W/per pair
Lumen: 4000LM/per pair
Color Temperature: 6000K
LED Chips: Chusyyray customized LED chips
Material: Heatsink aluminum shell
Fanless: yes, no noise
Lifespan: 30,000 hours
Waterproof Rate: IP65
Operating Temperature: -40℃~+90℃
Warranty: 5 years warranty
Package: 2x led bulbs
Package Included:
2 x H11 LED Headlights Bulbs
New and old packaging will be shipped randomly
2 x H11 LED Headlights Bulbs
New and old packaging will be shipped randomly
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.