You may also like

An excellent project starts with a wonderful hot glue gun with glue sticks.

Drip-free Nozzle & Leak-Proof Ring — Can effectively avoid the situation of spills and prevent leakage of the glue.

Long Standby Time — 2200mAh Lithium-ion battery ensures a long standby time.

1 Min Fast Preheating — Update smart temperature control design enables it to remain constant temperature.

Automatic power-off system — It will power off after 10 minutes for safety and saving power.

Safety Design — The PTC heating component and the built-in fuse ensure that you can work with it safely. By automatically controlling the temperature, the mini hot glue gun can keep the temperature constant and prevent overheating.

Wonderful for different DIY projects
Easy to use

EASY TO USE !

Follow these steps and enjoy your wonderful crafting!

- 1. Insert the glue stick.

- 2. Press and hold the switch for 2 seconds. Red light and green light shine at the same time.

- 3. After 1 minute, the red light will change to green. The equipment is ready.

- 4. Pull the joystick to start. (It is forbidden to remove the remaining glue sticks during use.)

- 5. Press and hold the switch for 2 seconds to turn it off. (In the process of crafting, the glue gun will automatically turn off in 10 minutes of inactivity to protect the safety of the user.)

- 6. The red light is on when charging; the green light is on when fully charged. The red light is on when there is no electricity. The red light flashes 3 times and then goes out.

2 LED Indicator Light

Attention:

- 1. The product uses a charger with output voltage of 5V and current of 1-2A, so it requires the voltage and current to meet the needs and if the actual voltage and current are lower than this standard, it will spend more hours charging.

- 2. Do not remove the remaining glue sticks or pull out the unused glue stick during use , it will damage the glue gun. Besides, the glue stick can be only be replaced after the glue gun is power off.

- 3. When the glue stick is not long enough to advance, you need to add a new glue stick.

- 4. Remember to turn off the power when not in use.

- 5. When the glue gun needs to be placed during work, first put down the bracket and then stand it on a flat surface.

- 6. Do not directly touch the nozzle and hot glue during use to avoid scalding.

WARM TIPS

1. Q: How to start the glue gun for crafts?

- A: Press the on/off button and hold it for 2~3 seconds to turn on the machine.

2. Q: How to charge? How long does it take to fully charge?

- A: Put it on the charging base, plug in the USB charging cable to charge (the indicator light turns red). When the charging indicator light turns green after 2 hours (theoretical value), it indicates that the lithium battery is fully charged.

3. Q: How long does it take to charge after using this product?

- A: After fully charged, It could be used intermittently for 100 minutes or continuously for 30 minutes if you keep pressing the trigger. If the lights turn red and dim, the hot melt glue gun needs to be recharged.

4. Q: Why doesn't the indicator light turn on when charging？ So it can't charge in?

- A: If the indicator light is not on, please check whether the glue gun is aligned with the charging point of the charging base.

- B: If the alignment still does not light up, please leave it to charge for five minutes, after five minutes the red light will turn on.

- C: The reason that the indicator light is completely off is that the battery is completely consumed, and it takes a while to recharge and the indicator light.

5. Q: Why is there no glue?

- A: Answer: The preheating time is insufficient or the switch status is wrong; if the gun body does not heat up after preheating, the heating element is malfunctioning; in addition, if it is not used for a long time when the power is on, it will also cause the glue stick to carbonize (scorch) and block the gun nozzle, It can be used normally by dredging with thin iron wire or fine needle.

6. Q: Why pour glue/leak glue?

- A: The glue stick of the applicable specification is not used; or the trigger has been compressed without preheating before use; excessive/frequent compression of the trigger during use will cause the heat energy to fail to keep up with the performance, resulting in glue leakage.

7. Q: Why is it dripping?

- A: During preheating, the glue stick changes from solid to liquid, and the shape changes. It is normal to drop glue within 1-2 minutes. Different glue sticks have different melting points. It is recommended to use 7mm glue sticks.

Use tips

1. When you use it for the first time, it is recommended to charge it fully before use

2. The glue gun is suitable for glue sticks with a diameter of 7mm or less