PHOTOS FOR USERS REFERENCE AS WELL AS PARTS SPECIFiCS and USAGE GUIDELINES are from Manualslib.com the entire manual for product is available for viewing or downloading at the sight as well

     This Chauvet Ch-310 Double Derby Lights package includes two light fixtures, each with clear bulbs that display red, blue, green, and yellow colors. The fixtures can be manually panned and tilted, and come with a cable and connector for easy setup. Measuring 14.5 inches in length, 11 inches in height, and 15 inches in width, these effect light fixtures are compact yet ruggedly constructed, with a built-in display and mounting bracket.

Controlled manually, these lights feature music control and are fan cooled. They use halogen lighting technology to produce color mixing effects. The package includes a CHAUVET DJ model CH-310 unit with 2 lights, making it a great option for anyone in need of stage lighting for musical performances or other events.

Caution

Do not obstruct the air vents or the fan.

Do not touch unit or lamps while hot

.No user serviceable parts inside, please refer to CHAUVET for service.

Power Connections

The unit is supplied with a power plug appropriate to its voltage and destination. Should any otherconnections be required they must be carried out with the following configuration.

Earth = Green/Yellow cableNeutral = Blue cableLive = Brown cableIn the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.In the UK, it is required that all mains plugs are fitted with 5A fuses.

TechnicalSpecificationsPower120V~60Hz:230V~50Hz

AAC20mm  Glass 7A Fast Blow2 x 120V 300WAC20mm Glass 3.15A Fast Blow2 x 120V

LampsPart No 64514;(wired in series)Part No 6451411.5kg

Dimensions380 x 368 x 280mm / 15in x 14.5in x 11in

WeightUser Information: 25lbs

Introduction

Congratulations on the purchase of you CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we

have prepared this short guide.

Operation

Before connecting this unit to the mains power supply for the first time you must first install the lamps. (See ‘Replacing Lamps’ for details). This lighting effect has been designed to function on a mains power supply of either 120V~60Hzor 230V~50Hz and has been fitted with a suitable power plug for use with your local voltage.

Check the label and voltage selector switch (if fitted) on the unit and the power plug for thecorrect voltage.

When connected to the mains power supply the unit should illuminate and the fan should rotate.

As the effect is sound activated it may be necessary to adjust the audio sensitivity control.

Due to the high operating temperature of halogen lamps it is advisable that the effect be used in well ventilated areas taking care not to obstruct the air vents or the fan. After use allow time to ‘cool’ for safety and to ensure lamp life before moving or touching. The duty cycle for this effect should be no more than 15 minutes on then 15 minutes off.

Installation / Mounting

This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect be properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting.

Use in a well-ventilated area without obstruction to the fan.

Replacing Lamps

1. Disconnect from main power supply before attempting to replace either lamps or fuse.

2. Ensure that the unit is sufficiently cool, before removing blown lamps.

3. Never touch new lamps with your fingers; use a tissue or a cloth.

In order to replace the lamps, disconnect from main power supply first, and unscrew the lamp replacement cover, which is highlighted on the diagram (fig.1). Only use the appropriately rated lamps as use of any other lamp type may cause the unit to be non-operational.Due to the nature of halogen lamps it is vitally important that you do not touch the newreplacement lamp with your fingers, as this will reduce lamp life considerably. Once again a tissue or cloth can be used for fitting the replacement lamp. In situations where only one lamp has blown, it is advisable that you replace both lamps together for efficiency and ease.Finally before using, check that the lamps are housed correctly in the lamp holder and that thelamp replacement cover has been screwed back into place.If after replacement of the lamps, the unit is still not working then please contact

CHAUVET for servicing.

Replacing Fuses

If the unit does not function at all when connected to the main power supply i.e. the fan does notrotate or the mechanism does not spin. Then it is highly likely that the fuse has blown.

Disconnect from main power supply before attempting to replace either lamps or fuse.In order to replace the fuse, disconnect from the main power supply first, and then unscrew the

fuseholder cover to reveal the fuse. The unit has a label attached which indicates the correct fuserating and you will also find this listed as part of the specifications for the unit later in this guide. Itis most important that replacement fuses are of the correct rating. Failure to use the correct fuse

could damage the lighting effect beyond economic repair.The fuse should simply be placed inside the holder and the screw cap replaced, when this isdone connect to the main power supply to check. If the unit is still not working then please contact CHAUVET for servicing.

Cleaning

The most important part of your lighting effect to keep clean are the lenses as they allow the lightoutput to transmit. These should be cleaned with a soft damp cloth. The body of the unit may alsi be cleaned in the same way. We recommend internal cleaning be carried out by a fully qualified

technician.

Maintenance & Servicing

Work on internal parts should be carried out by a qualified technician. Removal of any coversother than the lamp replacement access or the fuseholder is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the company.

Troubleshooting

• If the unit is not functional – check main power supply is ‘on’ and check fuses.

• If the unit is functional but lamps do not light - lamps may require replacing.

• If the unit lights but will not move - adjust sensitivity control.

If after trying this solution you still have a problem contact your dealer or CHAUVET.

This item does work. All checked and working parts other than you will need to replace one of the 2 bulbs I recommend buying 2-4. Once installed and up and running they last but sometimes in bulb changing it is best to do both at once despite weather they both function. And obviously always have 2 spare as not to disrupt shows by bulb dying. Original power cord and cable for connection.