Product material: aluminum alloy
Input voltage: AC220V/50Hz or AC110V/60Hz
Fuse: 5A or 10A
Preheating time: about 3 minutes
Control mode: DMX512, remote control
Control channel: 2CH
Working temperature: -10℃-50℃
Cooling mode: built-in fan
Remote control beam height: 3 gears at 3-4 meters, 2 gears at 2-3 meters, 1 gear at 1-2 meters (indoor range 1 meter to 3 meters, outdoor range 1 meter to 5 meters)
This product is shipped from the UK warehouse, usually 3-5 days to arrive
|
|
|
|
---|---|---|---|
DMX ProgrammingIt also supports DMX512 control and programmable special effects. We provide 1 signal cable and 1 signal receiver, so you can use DMX to program. |
Visual LED screenEquipped with LED display, it is clear at a glance, and the working status is displayed through the upper numbers, which is convenient for you to use. |
Instructions for useThe spark machine LA-H paired successfully. After loading the consumables into the feeding chute, press the A button on the remote control to start preheating the temperature as shown in the figure. When the temperature indicator reaches 550 degrees, the yellow indicator light is always on. On the remote control, press the three BCD buttons corresponding to different heights. |
Notice1. The consumable composite titanium Particles for the special stage spark machine needs to be purchased separately. 2. After each use of the machine, please clean up the residual material in the special effect machine to prevent the machine from being blocked. |