🚘Power Probe Master Kit is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician.

🚘[The Main Function]: The P100 Power Circuit Probe Kit is mainly used to test car battery voltage, AC and DC voltage test, resistance, leakage, short circuit, component activation overload protection and other car circuit system problems. Auto circuit tester with large battery clip, can carry more load. Support wide input voltage range from 9V to 70V, also support 12V cars and 24V trucks.

🚘[Working Modes & Easy to Diagnose]: Easy to navigate user menu allows reading DC Voltage, AC voltage, Resistance and Diode parameters very clear. A quick self-testing is a must before to test a circuit or component, ensure your tool is in excellent condition.

🚘[Accurate Data & Safety Design]: Tiny deviation and more precise testing data. The circuit tester automotive can use this unit to analyze any range from 9V to 70V batteries healthy, tells you everything about the battery. The circuit probe kit can protect the circuit when power supply is reversed.

🚘[Features]: The automotive circuit tester with 20Ft extension cable, environmental protection material, Not pungent.low power consumption, high performance. Durable and Safety - An auto circuit breaker makes this tool very safe and sustainable ,even a beginner can easily use this automotive diagnostic test tool without the manual.

🚘[Widely Applicable]: Wide range applications,professional diagnosis, support Multi-languages.The P100 Automotive Circuit Tester can be used as electrical tester, breaker finder, power tester, wire tester, car fuse tester, continuity tester, Short Finder, automotive multimeter, etc.

General description tool is the best electrical tester, reducing diagnostic time in all 6-30V at vehicle electrical systems after a simple hook-up of the tool to the vehicles’s battery, you can:

1. Determine at a glance if a circuit is positive, negative or open without having to reconnect clips from one battery pole to another.
2. Test for continuity with its built -in auxiliary ground lead.
3. By depressing the own switch of tester electric, conduct a positive or negative battery current to the probe tip for testing the function of an electrical component without the use of jumper wires.
4. Test for poor ground contacts of this circuit tracer instantly without performing voltage drop tests, the tool is also short-circuit protected its internal circuit break will trip if it becomes over loaded.

What are the advantages of the product？
Purpose of the P100 Power Circuit Probe Kit:

Diagnose battery Status
AC/DC voltage, resistance, diode test
Componet activation
Find short circuit
Find the broke wire
Find the bad ground
Testing trailer lights
Check continuity
20Ft extension cable

1. Probe tip of electric tester-contents the circuits or component to be tested
2. Head lights-illuminate dark work areas or work areas at night
3. Red/green polarity indicator-identifies positive, negative or open circuits the red indicator lights when the probe tip is contacting a positive circuit the green indicator lights when the probe tip is contacting a negative circuit
4. LED display-indicates test results
5. Power switch-allows you to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components
6. Mode button-selects the work mode: AC voltage, DC voltage, resistance, Diode
7. Speaker-when the audio tone is turn on a beep will be heard
8. Auxiliary ground lead-assist test as a ground lead
9. Adapter-connects to the battery

There are four modes to diagnose the circuit tester, which can be accessed by depressing the mode button and cycling through each one.

DC voltage: Contact the probe tip to a circuit then the LCD display will read the dc voltage with a resolution of 0.1 volt
AC voltage: Contact the probe tip to a circuit then the LCD display will read the max. voltage, the min voltage, frequency and duty cycle
Resistance: Contact the probe tip to a circuit then the LCD display will read the resistance between the tip and auxiliary ground lead
Tone on/off: Just do a quick press of the mode button to toggle the tone on or off while quickly press(a quick press and release)the mode button, if a short high been is heard this means the audio tone is turned on, if a short low beep is heard, the audio toned off

Specifications:

1. Display: TFT color display (160 x 128 dpi)

2. Operating Temperature: 0 to 60°C (32 to 140 F°)

3. Storage Temperature: -40 to 70°C (-40 to 185 F°)

4. External Power: 12.0 or 24.0V power provided via vehicle battery

5. Dimensions: Length 165 mm * Width 40 mm * Height 27 mm

Test Tool Specifications:

DC voltage range : 0-65V +1 digit

Resistance range : 0-200 K ohm

Frequency response of tone pass through

0Hz to 10K hz.

Circuit Breaker

Rating current: 1-10 Amp

Testing Standard:

100% current : no trip

150% current : trip in one hour

200% current : trip in 3-30 seconds.

300% current : trip in 0.5-4.0 seconds.

Excellent Design Details
About P100 Automotive Circuit Tester:

Red/Green Polarity Indicator (Positive/negative and tests in different modes will show red/green indicator lights).

Multi-Language Options (English, German, French, Spanish, Italian, Portuguese, Russian).

How to select language with P100 Circuit Tester

1. Press [Mode Button] enter into the [Language] interface.

2. Push [Power Switch Button] forward to select, Press and Hold [Mode Button] enter into L anguage setting interface.

3. Press [Mode Button] to select desired language, Press and hold [Mode Button] back to working status.

LCD HD Color Display (Adopt LCD color screen, the screen is clearer and the data is more intuitive).

Package Include:

Package option 1:P100-2M（6.56ft）

Package option 2:P200-10M(come with 10m（32Ft） extend cable and cigarette lighter power cord )