SILICONE All Purpose Silicone Glue Adhesives 32ml

ISO 9001 & 2008 Certified Company

DIRECTIONS

1) Thoroughly clean and dry surface from oil, dirt and grease with mineral turpentine.

2) Pierce seal at end of tube by inverting cap and pushing into top of tube.

3) Cut nozzle at a 45 degree angle and fit to tube.

4) Hold tube at 45 degree angle and push silicone ahead of nozzle

5) For a smooth finish, too with spatula, excess silicone must be cleaned up before the sealant skins in 5-10 mins. Wipe excess away with a cloth dampened in mineral turpentine.

6) Sealant will cure fully in 48hours. At this point any unneeded silicone can be removed by trimming with a sharp blade, but avoid under-cutting seal

7) After use remove nozzle and replace cap