Product Details

5*5 25bit
 

Feature:

  1. Intelligent reverse connection protection, power supply reverse polarity will not damage the IC.
  2. The IC control circuit shares a power source with the LED point light source.
  3. The control circuit and the RGB chip are integrated in a 5050 packaged component to form a complete external control pixel.
  4. Built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
  5. Built-in power-on reset and power-down reset circuit.
  6. Trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all true color display, the scanning frequency is not less than 400Hz / s.
  7. The serial cascade interface can complete the data receiving and decoding through a signal line.
  8. Transfer transmission distance between any two points in less than 5m/16.4ft without any additional circuitry.
  9. When the refresh rate is 30 frames / second, the number of cascades is not less than 1024 points.
  10. The data transmission speed up to 800Kbps.
  11. The color of the light highly consistent, cost-effective.

Specification:

Condition: 100% Brand New

Item Type: LED Development Board

Material: Components

Color: As pciture shown

Main Application Areas:

LED full-color luminous character string, LED full-color module, LED full-color soft light bar, hard light bar, LED guardrail tube

LED point light source, LED pixel screen, LED special-shaped screen, various electronic products, electrical equipment marquee.

 

Package List: 

1 x 5*5 25 bit LED Development Board Module

 
 

8*8 64 bit

Description:

WS2812 family is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit. effectively ensuring the pixel point light color height consistent. The data transfer protocol use single NZR communication mode. After the pixel power- on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. Pixel adopt auto resha-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.

LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angle is large, good consistency, low power, long life and other advantages. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.

Every ring is equipped with a single data line with a very timing-specific protocol requiring a real-time microconroller with a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces.

Features:

Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.

The control circuit and the LED share the only power source.

Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.

Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

Built-in electric reset circuit and power lost reset circuit.

Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.

Cascading port transmission signal by single line.

Any two point the distance more than 5m transmission signal without any increase circuit.

When the refresh rate is 30fps, cascade number are not less than1024 points.

Send data at speeds of 800Kbps.

The color of the light were highly consistent, cost-effective.

Specifications

Voltage: 5 V

Size: 65* 65mm

Package Included:

1x 64-bit WS2812 5050 RGB LED Development Board With Built-in Full-color Driver

 

 

16 bit Ring type:

 

Overview:

Outer Diameter: 45 mm  internal diameter 36mm

Supply Voltage: DC 4-7V

Communication interface: single wire communication

Send data at speeds of 800Kbps

The color of the light was highly consistent

Full-color module, Full-color soft lights a lamp strip

Description:

The 16Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board has round black shape, 16 super bright smart  LED arranged in a 45mm outside diameter circular PCB.

These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input pin (DI-DO). In this way, by using only one single chip you will be able to control as many LED lights as possible, each LED lamp is integrated with a driver chip in it so that our LED becomes intelligent and addressable.

Each has a -18mA constant current drive, so the LED color will be very uniform, even if the voltage change is the same, do not need an external resistor current limiting resistor to make the overall design of the RGB lamp ring to become slim, as you see so simple and easy to use. With 5V power supply to drive the RGB lamp ring.

Single wire communication, to maximize the reduction of I/O port pressure, and the use of the RGB WS2812B driver chip, so that the peripheral circuit requires only a single capacitor can meet the needs of the circuit, give people the enjoyment of beauty, in addition, this RGB ring, but also through a simple Dout input port, and the other using the same chip RGB lamp cascade, without need considering the shape of the limit.

Features :

The control circuit and the LED share the only power source.

Control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point.

Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

Built-in electric reset circuit and power lost reset circuit.

Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.

Cascading port transmission signal by a single line.

Any two points the distance more than 5m transmission signal without any increase circuit.

When the refresh rate is 30fps, cascade number is not less than 1024 points.

Send data at speeds of 800Kbps.

The color of the light was highly consistent

Full-color module, Full-color soft lights a lamp strip.

LED decorative lighting, Indoor/outdoor LED video irregular screen.

Package Include:

1 x 16Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Ring Development Board

 

 

 

 
  • EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

DataCaciques