2Nm Nema 23 kit included:
- 1 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor CL57T
- 1 x 2Nm Nema 23 Closed Loop Stepper Encoder 1000CPR
- 1 x MEAN WELL LRS-200-36 200W 36VDC 5.9A 115/230VAC Enclosed Switching Power Supply
- 1 x 1.7m Long Encoder Extension Cable for Closed Loop Stepper Driver
- 1 x RV-4 AWG20 1.7m Long Motor Extension Cable with GX16 Aviation Plug for Nema 23 and 24 Closed Loop Stepper Motors(Just for aviation-plug model motor)
- 1 x RS232 Debugging Cable
Motor Specification
- Manufacturer Part Number: 23HS30-5004D-E1000
- Number of phase: 2
- Step Angle: 1.8 deg
- Holding Torque: 2.0 Nm(283.28 oz.in)
- Rated Current/phase: 5.0 A
- Phase Resistance: 0.42 ohms
- Inductance: 1.7 mH ± 20%(1KHz)
- Frame Size: 57 x 57 mm
- Body Length: 101mm
- Shaft Diameter: Φ8mm
- Shaft Length: 21mm
- D-CUT Shaft Length: 15mm
- Lead Length: 300mm
Encoder Specification
- Output Circuit Type: Differential type
- Encoder Resolution: 1000
- Output Signal Channels: 3 channels
- Supply Voltage Min: 4.5V
- Supply Voltage Max: 5.5V
- Output Current: 100mA MAX
- Output High Voltage: ≥Vcc-0.4V
- Output Low Voltage: ≤0.4V
- Output Frequency Max: 1.85MHZ
Power Supply Specification
- Part Number: LRS-200-36
36V DC 5.9A output
AC input voltage range: 90 ~ 132VAC
Rated power: 212.4W
Withstand 5G vibration test
Withstand 300VAC surge input for 5 second
High efficiency, long life and high reliability
3Nm Nema 23 kit included:
- 1 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
1 x Nema 23 Closed Loop Stepper Motor 3.0Nm/424.83oz.in Encoder 1000CPR
1 x Mean Well LRS-200-36 212.4W 36V 5.9A Enclosed Switching Power Supply
1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver
1 x RV-4 AWG20 1.7 m(67") Long Motor Extension Cable with GX16 Aviation Plug for Nema 23 and 24 Closed Loop Stepper Motors(Just for aviation-plug model motor) - 1 x RS232 Debugging Cable
Motor Specification
- Manufacturer Part Number: 23HS45-4204D-E1000
Number of phase: 2
Step Angle: 1.8deg
Holding Torque: 3.0Nm(424.83oz.in)
Rated Current/phase: 4.2A
Phase Resistance: 0.82ohms
Inductance: 3.6mH ± 20%(1KHz)
Frame Size: 57 x 57mm
Body Length: 138mm
Shaft Diameter: Φ8mm
Shaft Length: 21mm
D-CUT Shaft Length: 15mm
Lead Length: 300mm
Power Supply Specification
- 36VDC 5.9A output
AC input voltage range:90 ~ 132VAC
AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
1U low profile
Withstand 5G vibration test
LED indicator for power on
No load power consumption<0.75W
100% full load burn-in test
High operating temperature up to 70℃
Operating altitude up to 5000 meters (Note.8)
High efficiency, long life and high reliability
3 years warranty
4Nm Nema 24 kit included:
- 1 x Closed Loop Stepper Driver 0-8.0A 24-48VDC for Nema 17, 23, 24 Stepper Motor
- 1 x Nema 24 Closed Loop Stepper Motor 4.0Nm/566.56oz.in Encoder 1000CPR
- 1 x 250W 48V 5.0A 115/230V Switching Power Supply Stepper Motor CNC Router Kits
- 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver
- 1 x AWG20 1.7 m(67") Long Motor Extension Cable with GX16 Aviation Plug
- 1 x RS232 Debugging Cable
Motor Specification
- Manufacturer Part Number: 24HS40-5004D-E1000
Number of phase: 2
Step Angle: 1.8 deg
Holding Torque: 4.0Nm(566.56 oz.in)
Rated Current/phase: 5A
Phase Resistance: 0.60ohms
Inductance: 2.6 mH ± 20%(1KHz)
Frame Size: 60 x 60mm
Body Length: 125mm
Shaft Diameter: Φ10mm
Shaft Length: 21mm
D-CUT Shaft Length: 15mm
Lead Length: 300mm
Power Supply Specification
- 48V DC 5.0 A output
AC input voltage range:92~132V/180~264VAC
115V/230V AC selected by switch
High efficiency low cost
Free air cooling convection
Low output ripple and yawp
Over current, over voltage, short circuit and overheat protections
215*115*50mm (L*W*H)
Motor and Encoder Connection
|
PIN
|
1
|
2
|
3
|
4
|
|
Motor
|
A+
|
A-
|
B+
|
B-
|
|
PIN
|
2
|
3
|
1
|
13
|
11
|
12
|
|
Encoder
|
VCC
|
EGND
|
EA+
|
EA-
|
EB+
|
EB-
|
Motor Extension Cable Connection
|
PIN
|
1
|
2
|
3
|
4
|
|
Color
|
White
|
Green
|
Blue
|
Black
|
Or
|
PIN
|
1
|
2
|
3
|
4
|
|
Color
|
Black
|
Green
|
Red
|
Blue
|
Encoder Extension Cable Connection
|
PIN
|
2
|
3
|
1
|
13
|
11
|
12
|
|
Color
|
Red
|
White
|
Black
|
Blue
|
Yellow
|
Green
|
PLEASE NOTE: The thick black wire can be used for shielding, but it is not required, so you can leave it unconnected.
Am 19.03.2024 hat der Verkäufer die folgenden Angaben hinzugefügt: